• Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!

testing out my new setup..

Overclockers is supported by our readers. When you click a link to make a purchase, we may earn a commission. Learn More.

Ankun

Member
Joined
Nov 29, 2005
Location
Virginia
hardware:
A64 3800+ X2
DFI Lanparty NF4-D
2x 256 MB Crucial Ballistix
eVGA Geforce 6200

cooling:
BIP3 w/ 2x evercool aluminum fans
D5 pump
Swiftec Apogee Block


2700mhzprime.jpg


Not bad IMO.. I didnt have enough time to try any higher vcore. Got it to boot at 2.8ghz with the same vcore.. wasnt very stable though. Eventually I hope to try to push it a little more. I had to open my window in order to keep my case temp low enough to keep my chipset / PWMIC temps in check. :(

At the same settings PWMIC rockets up to around 55-60C.

Memory is 1:1 btw.. not bad I guess for $50 worth of ram.
 
OP
A

Ankun

Member
Joined
Nov 29, 2005
Location
Virginia
TY.

I need to think of something to do about these voltage regulators though. I cant run anything over ~1.475 volts without them getting extremely hot >_<

The NB tends to get quite hot around 265mhz+ FSB too.. hotter than I'd like at least.

I'd love to give this setup a real test run, my CPU seems pretty powerful thus far.

edit: anyone know what stock volts on this chip is? Atm I run it day-to-day at 2.5ghz w/ 1.35V