TT Tower 900 drive cages & trays

[solancea83]

So, I went looking through my case parts a couple of weeks back to get out a cage and trays to put in another 3.5" hdd, and most of my spare parts walked off(assuming former roommate that fled state when caught doing felony stuff took them)

Long and short of it is, I've contacted thermaltake and they do not have any of the rear trays or cages for the tower 900 in either black or white. I need at least 1 bay and 2 trays up to 3 cages and 6 trays. If you know where I can get them, or where a stl file for them is, please let me know, or if you have the spares that would be wonderful too.

Thank you all in advance! Totally new here so if I buggered something up, please let me know so I can remedy it.
-Sol


There was an earlier thread where a few users discussed the trays and one said they had the trays, another that they might have the 3dp/stl files but it was a few years old and didn't want to do thread necromancy.

 

[solancea83]

@caddi daddi Heya sir, just found the other thread and you were the person that said they had drive trays and cages a good while ago. My apologies for being a pest and tagging you, but was wondering if you still had any of the tower 900 parts?

 

[DaveOC]

@caddi daddi Heya sir, just found the other thread and you were the person that said they had drive trays and cages a good while ago. My apologies for being a pest and tagging you, but was wondering if you still had any of the tower 900 parts?

Have you had any luck or found a solution? Just got the case myself and having the hardest time finding accessories.

 

[solancea83]

Sadly no, thermaltake did not have spares in either colorway, no one here has messaged or replied other than you, I found someone on fb marketplace that had one they were selling and they said they would get me a shipping and price on the extra cages they had but that never came to fruition either. I wish there was a 3d model of the cages I could just print and send out to people needing them for cost or TT would restock the parts, the tower can hold so many drives but they give you so few drive cages.

 

[caddi daddi]

I'm sure I have these up at the winter house, but we will not go there till after the first of the year.
As I remember there are three parts to this setup.
Do you just need the drive tray and cage?
where are you located?
I will be in the United states.

 

[solancea83]

Heya CD! Thank you for replying and being willing to at least see if you have them all available, honestly any of the drive cage parts would be great including the front center mount under motherboard possibly but if I was picking just one, the rear mount cage setup is prefered. I'm going to have a friend model them when I have an extra to send them and try to get a STL file available for people, maybe if I get the printer upgrades done print some out in CF nylon for people for just cost+ship since it's been a bit rough to find them. I'm not in a terrible rush or anything for the parts so I don't mind waiting, I just want to get them so I can shuck the externals I have and put them internal and clear up USB slots and space on desk after I get it scanned and modeled or measured and modeled.

I'm in the US, I'll DM you address info and whatnot in just a few minutes.

 

[caddi daddi]

OK, in the back of mine I have one cage and two populated drive trays.
If I remember correctly these cases came with two cages and two drive trays for each, if I'm right I should have A cage and two trays in storage someplace.
I'll try to get to storage and see if I can find them this week or next.

 

[solancea83]

OK, in the back of mine I have one cage and two populated drive trays.
If I remember correctly these cases came with two cages and two drive trays for each, if I'm right I should have A cage and two trays in storage someplace.
I'll try to get to storage and see if I can find them this week or next.

I'd appreciate that, but not hyper critical and I still have no idea who I would have to get in touch with to make a model of them or scan them that doesn't want $300 bucks to do each scan, so don't rush or put yourself out of them if you need/want them back in any sort of timely fashion. Thank you again either way. Currently fighting some issues messing with finances pretty nastily, trying to sell off some old coins and a vape and some anime figures to make up for it though, so maybe things will work out sooner than later.

 

[caddi daddi]

shipped out ups

 

[solancea83]

shipped out ups

DM inc