Unlocking an XP

[diehrd]

Hi all there is an Overclockers site that shows you what bridges to close and which ones to cut allowing you to set Multiplier on the XP...

ANY ONE KNOW THIS SITES NAME ??????

 

[plague]

I used this guide when i unlocked mine, except i used silicon thermal grease and a rear window defogger repair kit.

 

[diehrd]

I know how to unlock it thanks ... BUT there is a site that SHOWS exactly what bridge combo produces a certain Multiplier.

This is for someone without Bios controll over Multiplier even if ya connected the L1 bridges...

So if ya wanted say 12.5 instead of the 11.5 stock,, this site had pictures showing what bridges to modify that automaticly make the processor default to the 12.5 ...

It is an ocers site I just forgot to bookmark it lmao

 

[Starfoxer]

awesome page, bookmarked.

i have a question, my mobo will only do vcore up ti 1.85 at a
1.75 default. so if i connected the bridges that gave me a 1.8
defualt i could get it to 1.9, is this correct?

 

[stompah]

sure DONT read my AMD FAQ. its not like it was in there or anything like that. or its not like you have to dig thru the forums to find it

 

[stompah]

i have a question, my mobo will only do vcore up ti 1.85 at a
1.75 default. so if i connected the bridges that gave me a 1.8
defualt i could get it to 1.9, is this correct?

probably not. but try it anyway. i did it to my duron and it would still max me out at 1.85v. in fact the BIOS would show errors at any other voltage setting.

 

[diehrd]

sure DONT read my AMD FAQ. its not like it was in there or anything like that. or its not like you have to dig thru the forums to find it

Dude if ya had T I T S I would kiss ya !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Now I can turn up the heat on these 2 XP 1800

 

[OnDborder]

awesome page, bookmarked.

Ditto, I like the idea of using thermal paste instead of glue.