Unlocking my 1200MHZ DURON

[Bergfuerst]

I Have now a 1200MHZ duroN! But i cant unlocking it!
Normaly this Processor have 4L1 Britches but my one have 5!?
Whats up there!
Cause I have a Overclocking Friend from Austria and he has this CPU too!
BUt he has only 4 L1 Britches in one litte!

 

[cjlax5]

its because u have the new morgan core. unlocking should be the same as before, connect all the bridges. someone correct me if im wrong

 

[Bergfuerst]

No its not right I`ve tried it!

Morgen core ok - But he has the SAME CPU!
1200MHZ DURON IS MAYBE NOT THE SAME LIKE 1200MHZ DURON

 

[Milkman]

I also asked about the 5 L1's on my 2000+ and the reply was that the extra bridge was for multipliers beyond 12, as thesen are not supported just connect the first 4 going from the L1 and you should be good to go

 

[cjlax5]

they make the 1200 MHZ duron with the Morgan core and with out. your friend probably has an older one and u have a newer one with the new core. if i am missing something tell me

 

[Bergfuerst]

Thats nice but with the first 4 it isn`T good!!
Tested!

 

[Yodums]

The Morgans have 5 L1 bridges. You might wanna try to erase the marks off, then clean the surface with isopropyl, let it dry abit (1min), then try reconnecting it, with a cleaner unlock. It might be just that your not unlocking it clean enough. I used a mechanical pencil for some precision, then I used a 10x magnifying glass to see if it was good.

What I did was:

I lightly traced over the bridges, then I darkened them like hell for like 5mins so they wouldn't go away!

Then I inspected with a magnifying glass.

Yodums

 

[cjlax5]

unlocking should be the same as before, connect all the bridges.

like i said "connect ALL the bridges" not just 4 of them

 

[Bergfuerst]

Ok only the first 4 britches from the edge!