• Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!

Voltage DLT3C???

Overclockers is supported by our readers. When you click a link to make a purchase, we may earn a commission. Learn More.

seren

Member
Joined
Dec 22, 2002
Location
Conwy North Wales
I have a 1700 JIUHB DLT3C 0310 and everytime I try to up the voltage to 1.775 or over it freezes in prime 95 it does this no matter what fsb or multiplier I use, it's a new rig 3 weeks SL-75FRN2-L board, my 12 volt rail fluctuates between 11.612 11.673 and 11.79 that's in the soltek monitor sandra reports 11.79 any ideas thanks.
 

dreammmatt

Member
Joined
Dec 28, 2002
temperatures? what kinda cooling are u using? because wont more voltage make higher temps, regardless of fsb/multi settings?
 
OP
seren

seren

Member
Joined
Dec 22, 2002
Location
Conwy North Wales
I am using SK7 HS Thermaltake smart fan 2 at my last try @ 180 x 13 and 1.7 vcore ABS11 51c cpu die 38c running prime.

I have tried lots of other combinations have done 220 x 10.5 1.725, 210 x 11 1.625 just to give you an idea of what i have done but it will not goe past 1.775 no matter what.

The 5 volt rail seems stable enough, thanks
 

jonspd

Super Speedy Senior
Joined
Jan 18, 2003
Same problem I had with my 1700DLT3C couldn't run higher then 1.8 volts without prime frezzing no matter what my 2100 will run 2.1 and not frezze but I run my 2100 @ 1.85-1.9 24/7
 

glock19owner

Member
Joined
Nov 6, 2002
Most 1700 DLT's (1.5v default) will not run past 1.8v's...and are very tempermental when running past 1.75v's...

My 1700 DLT 310 doesn't like to run past 1.775v's...but can still get up to 2350 at 1.65v's...
 
Last edited: