• Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!

waterpump

Overclockers is supported by our readers. When you click a link to make a purchase, we may earn a commission. Learn More.

jordan

Member
Joined
Dec 31, 2000
ok guys, I have two dangerden cube radiators and a few feet of tubing, the 200gph pumps just arent going to cut it here, anyone know of a inline pump that will flow something like 300gph and has the 3/8" fittings and still fit in my case?
 

0dan0

Registered
Joined
Apr 8, 2001
If I were you I would use a mag 5, which does 500gph. It has 1/2" fittings on each side, so just get a couple of plumbing parts at HD for like $3 to reduce those to 3/8" hose barbs.

-Dan
 

Colin

Arctic Silver Senior
Joined
Dec 19, 2000
I run a Nursery Pro 650 with one Cooling Cube. Restricting the flow does not lower the temps. What does this tell you?

BTW, the Nursery Pro 650 is the same pump as a Danner 700. Nursery Pro rates the flow at 1 foot, Danner rates the flow at no head. Kinda sneeky on Danner's part.