What are your temps and voltages water cooling?

[FIRESTARR357]

Just wanna see what temps people are getting and at what voltages. Trying to figure out if my temps 40c idle 45c load at 1.875v is good or should i shoot for better. feel free to put what you are running as well. I am running a eheim C1000 pump, chevette heater core with 2 120mm fans push pull both with shrouds and a maze 2 water block also 1/2ID tube.

 

[Soja]

23c ambient, 27c water, 50c load, cpu specs down below

 

[vonkaar]

Four weeks ago (before my system died) I was looking at...
1800 JIUHB @2550 (204x12.5)
1.95v
Load temp was 34°
Idle was 29°
Case temp was basically kept at ambient room temperature... I had lots of fans =p.
Water temp varied from 3° to about 25°.
New system should do better... after I work out my stupid Barton issue.

 

[Korndog]

2100+ @ 2.4ghz
2.0v Vcore, beat that!! wait.. thats bad.. erm..
38c idle, 41c load.

 

[ILikeMy240sx]

sig...

 

[Rokk1972]

1700 @ 2.52Ghz
Vcore @ 2.03 Volts
I have a 5 deg C difference between Idle and Load

over this weekend my temps were 28/33, but last weekend it was 2 degrees higher

 

[oRIDDLERo]

[email protected] 1.75 Volts
Innovatek on chipset/gpu/CPU Dual rads (Blackice extreme, and black ice pro.... jammed into a midtower)
AMB = 29c
Idle = 34c
Prime95 = 39c

 

[ILikeMy240sx]

[email protected] 1.75 Volts
Innovatek on chipset/gpu/CPU Dual rads (Blackice extreme, and black ice pro.... jammed into a midtower)
AMB = 29c
Idle = 34c
Prime95 = 39c

1.75??? arnt you a tad worried about SNDS?? Is that your 24/7 setup?

 

[pelikan]

I wish we had an accurate way to compare temps. But here's mine:

2500+ @2400 MHz, 220 x 11, 1.9V
Idle: 22-24C
Load: 28 - 30C

I'm using cold water.