what power supply are you using for your duallie?

[himura-dono]

will either be running a ttgi or if i get this non-con warehouse job i'm trying for, then i'll spring for pcp&c.

 

[SKtron]

Dual P4 Xeon 2.4 533 fsb Supermicro X5DA8
1.5GB ECC 2.5 Cas
3 SCSI disks 160
1 IDE HDD
1 DVD RW NEC 1300
1 CD RW Sony
G4 4200 OC'd a little.

All on 420W HiperPower Dual Xeon/MP/Opteron (EPS 12volt) Active Fan Control) Quiet Dual Fan Active PFC

Rock stable (W2K pro)

 

[rottenspam]

I use an antec true 430 no problems with my dullie. The PSU is nice and quite. Though it tends to run pretty hot when I overclock.

 

[nikhsub1]

so looks like it is possible to run dual amd's with a 350 watt fortron...but...it might be on the verge of not working...so maybe not all 350 watt fortron's would work...

Here is my dually with a 350W Fortron, this was when It had 2 1600's in it, now it has 2 2100's at 1950Mhz and stable as a rock and good rails. It folds 24/7.

 

[dustybyrd]

Here is my dually with a 350W Fortron, this was when It had 2 1600's in it, now it has 2 2100's at 1950Mhz and stable as a rock and good rails. It folds 24/7.

wow...i never tried using my 350 watt forton in my AMD dualie but it did great on the p3 1.62ghz duallie that I had with about the same components as in my current AMD dualie (see sig)....

Now, i am using the 530 watt fortron in my AMD dualie and the "software derived" rails are as such with no load versus with full load:

3.3=3.34-3.36
5v=5.02-5.06
12v=12.16-12.22

also,