what resistor to use for vcore mod on ak31?

[arkan]

whaT resistor value should i use for vcore modding my ak31 ?

 

[kwoon]

you can use 100k or 150k
and for the detail you shuld ask doctor
how about it doc?????

 

[Arkaine23]

resistor

I thought Doc recommended a 47k potentiometer.

 

[arkan]

someone told me 18k would work but i only used a 6 k when i modded my msy kt7 pro 2a so im not sure

 

[Vfrjim1]

I used a 47K Potentiometer from Radio Shack and adjusted it to 33K, worked for me.

 

[SickBoy]

If you want to get the board back to default voltage, you need to use a minimum of about 60k Ohms. I'd suggest two 47k ohm pots in serial. My AK31 was not quite able to get to default voltage through just the potentiometer with a 47k ohm pot.

 

[arkan]

understandable when i modded my msi kt7 pro2a( i pitty myself for the purchase)
my default voltage ended up being 1.90


will high humidity have a negative effect on the pot.'s lifespan? i live in the southern us and its already getting muggy

 

[kwoon]

all i know if you wanna get a higher vol above 0.3v use 47k potentiometer if you wanna go only 0.1 v go with 100k potentiometer

 

[arkan]

i scored a 50k pot from ratshack and some clips to test it out im just hoping i got the right one will find out tonight :L)