where can i get a D-Tek ProCore in the uk or from u.s that ships to uk.

[Ginge®Fella™]

Hi all (first post)

Need 1 of these and cant find it anywhere i need to get it online in the uk or a usa site that ships to the uk.

cheers

 

[SillyBob]

www.dtekcustoms.com

can buy straight from them

I ordered most of my watercooling stuff from them last week, they had it shipped to me in the UK within a few days, very quick

had 2 options for shipping, DHL and FedEx, I used FedEx which was slightly more expensive, but alot better, in my opinion.

 

[slater3333uk]

How much was shipping??

Weclome to the forums Ginge®Fella™

 

[SillyBob]

shipping was about $90 so i guess thats £50

but it still worked out alot cheaper weight was 7lb ish of stuff

 

[Ginge®Fella™]

cheers

Ok this is what im thinking of getting what do u think

D-Tek Pro-Core -Black 1/2"
120mm Aluminum Fan
Hydor L30 Pump
T-Fitting 1/2"

But im not sure on these the water block and what tubing i should get (ClearFlex High Grade Tubing: 1/2) or (Tygon High Grade Tubing: 1/2) also what waterblock shall i get as i like the maze 4 but dtekcustoms dont stock them, but do they have 1 just as good and will the t-fitting do to fill my setup insted of a reservoir.

cheers

 

[SillyBob]

Just as a sidenote, if you're thinking of ordering all of it from dtekcustoms, you might want to skip on the pump, and order it from the UK, because the americans run on a diff type of power setup (i have no idea what differences) something to do with voltage, thats why i ordered one already setup for the uk, from over-clock.com, the White Water block from dtek is apparantly very good, I ordered it on the advise of people on the forum, but havent got all my stuff setup yet, was also advised to go for the Eheim 1250 pump instead of hydor, for the extra flow & reliability, but i guess its down to preference. good luck

 

[SillyBob]

ooh, and yeah, i also went for a T fitting, theyre just as good, read the sticky

 

[Waterbug]

Hi all (first post)

Need 1 of these and cant find it anywhere i need to get it online in the uk or a usa site that ships to the uk.

cheers

Hi there, you can also order from scandinavia, they have a branch in denmark, i dont know if you would save money ordering from there as you would avoid the customstaxes from outside europe. But check it out and compare prices, i bought all my stuff from them, superb help and quick responses to your questions.

The adress is www.vcore.dk

 

[Ginge®Fella™]

SillyBob m8

What tubeing do you go for and how much did you setup come to in total.

 

[SillyBob]

I used clearflex 60 1/2"

not sure how much it cost in total, let me look at the txt files of my orders and figure it out

From dtekcustoms.com :

JR-120 Performance Radiator £20
2 JR 120 Fan Shrouds £15
2 Evercool Aluminium 120mm Fans £13
White Water Block £28
T-Fitting 50p
10 foot of ClearFlex High Grade Tubing (1/2") £8
Ceramique Thermal Compound £3
D-Tek Supercool £2
Nylon Hose Clamp (10- pack) £4
Shipping & handling £57

From over-clock.com :

Eheim 1250 + inlet adaptor £51
Orange Dye £4
Shipping & Handling £5


So total was about £210 yikes

 

[pauldenton]

Re: Re: where can i get a D-Tek ProCore in the uk or from u.s that ships to uk.

Hi there, you can also order from scandinavia, they have a branch in denmark, i dont know if you would save money ordering from there as you would avoid the customstaxes from outside europe. But check it out and compare prices, i bought all my stuff from them, superb help and quick responses to your questions.

The adress is www.vcore.dk

waterbug, cheers for this link - £1 is about 10.56 danish kroner atm according to the site cathar recommends for conversions.....
http://www.xe.com/ucc/convert.cgi

so shipping at 150dkk + 15dkk per kg over 1kg seems likely to be a lot cheaper - have to do the maths on the components.....

 

[Ginge®Fella™]

Cheers all

very help full as my setup come to £115 from dtek inc shipping and all i have to do now is get the pump.

cheers

 

[Waterbug]

Re: Re: Re: where can i get a D-Tek ProCore in the uk or from u.s that ships to uk.

waterbug, cheers for this link - £1 is about 10.56 danish kroner atm according to the site cathar recommends for conversions.....
http://www.xe.com/ucc/convert.cgi

so shipping at 150dkk + 15dkk per kg over 1kg seems likely to be a lot cheaper - have to do the maths on the components.....

No probs Often the prices seem very good in the US, but when you buy something from there and it gets stuck in the swedish customs it gets very expensive because they put on import taxes and other local taxes 25% above that. So if you arent a bunch of guys who orders a huge shipment together then its better to order from inside Europe, or you cross your fingers and hope it doesnt gets stuck in customs.