Which pin mod for me?...Bartons and K7D

[Vito]

Got a pair of XP2500s and want to use them on the K7D.
I did the L5 mod, now which pin mod do you guys suggest I use based on www.ocinside? I'd like them to run about 2100mhz if possible.

 

[aftermath]

i moded myn for 15 now at a fsb of 144 they run at 2160 mhz
if u want to run at stock fsb then a pin mod of 16 could be done that would be 2128

 

[cmcquistion]

http://www.ocinside.de/html/workshop/pinmod/amd_pinmod.html

Go for 15X and work from there.

P.S. Read the instructions here: http://www.ocinside.de/html/workshop/pinmod/amd_pinmod_howto.html
Use method 4, plugging wire into the sockets.

 

[mumrah]

mine are at 17 and sailing smoooth

 

[wquiles]

I am in the process of finishing my own K7D install and I started at 15x.

At 100Mhz you will get 1500, 133Mhz will give you about 2000Mhz, and using the BIOS I have been able to raise the FSB all the way to the max. (150Mhz) so that gave me 2250Mhz which is not too bad to start with given that I am using air cooling

William