WHOA 126C

[FNG]

Is it normal for the thermal sensor for my power supply to be at 126.5C. I don't have a thrmal sensor conncted to JTPWR but when it boots up sometimes it halts and makes me either continue or enter setup. I have the a7m266 and nothing connected to JTPWR. Setup shows JTPWR in red at 126.5C and something or other farenheit.

 

[KaHNZa]

It must be misreading it. Because at 126c your cpu would melt into a pile of silicon goo.

 

[FNG]

It's not the cpu temp i think it's supposed to represent the power supply tempurature.

 

[KaHNZa]

unless there is something new out that measures the PSU temp, there is no way. Still, 126c would melt everything in there, put your hand in front of the PSU fan and see how hot the air is coming out if there. If it boils the skin off your hand, then yes, its 126c.

 

[FNG]

then where'why is it gettting the reading? even mbm 5 reports it as 127C set to Asus 3 for the a7m266

 

[sifu quoc]

you prolly picked the wrong sensor....