• Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!

Wtf happened :(

Overclockers is supported by our readers. When you click a link to make a purchase, we may earn a commission. Learn More.

AkuraII

Member
Joined
Dec 1, 2003
Location
A-town PA
i tried upping my 1800+ a bit, i was at 200x10 from the stock. Then i tried changning the timings made the memory voltage to 2.7v and the vcore to 1.6v and it didnt boot. so i reset cmos and booted up [email protected]! my bios say 99.47clock x 11.5. And in windows its dosnt read it as a 1800+ the mhz is 1.14ghz now wtf [email protected] im mad/
 

jonspd

Super Speedy Senior
Joined
Jan 18, 2003
Just set the fsbxmuitl back to default of whatever. Should be like 11.5x133. Chances are with the NF7-s rasie the vddim to 2.9 in bios and you may need 2 3 2 11 instead of 2 2 2 11 seeing is your using hyperxpc3500(maybe Ch-5). Timing are really runny some work some dont it's just a trial and error marry go round if you knwo what I mean. I couldn't run my pc3500 @ 2 2 2 11 above 214 fsb but 2 3 2 11 would go to about 219 fsb.

P.S. cas 3 wouldn't even post .
 
OP
AkuraII

AkuraII

Member
Joined
Dec 1, 2003
Location
A-town PA
i had it at cas 2 3 3 8. So how do i fix it from being underclocked is it anything wrong or just set it back to how it was at first because i had it at 200x10 with those timings and 1.5v u think anything could have changed?
 

jonspd

Super Speedy Senior
Joined
Jan 18, 2003
In some cases you will lose you overclock ability on a cpu after you have ran the cpu @ a certain #. My old 2100 want do 2.4 so easy anymore but it still hit's 2.4 it just takes more volt's. I would try to set everything back to what you had it @ and see if it's stable again use prime95 and 3dmark2001 looping. IMHO prime95 for 24 hour's and 3dmark looping for about 6hour so pretty much make sure she;s stable. With your hardware you should be able to do 2 3 3 11 timing @ 200+fsb with pc3500 and the nf7-s. Might take a while to get it stable there but dont forget to up the vddim to 2.9 should effect the mem in anyway other then maybe a better overclock and better timing's. I would shoot for a 10.5 or above muiltplier also you get better bandwidth. above 10.5. But only bios 10 work above 220fsb witha 10 or 10.5 muilt AFAIK.
 
OP
AkuraII

AkuraII

Member
Joined
Dec 1, 2003
Location
A-town PA
Im happy again :) shes good thanks everyone. 200x10 until a better psu and cooling, if u know a good low priced psu hook me up with a link.