- Joined
- May 9, 2002
- Location
- Portland OR.
OK, here’s the set up: Abit BD711 raid board, crucial XMS 3200 CAS 2, GF 3 ti500, P4 2.4 Northwood (unlocked) Maxtor 80Gb HDD 7200, All new stuff (slightly used proc.)
Here is the problem: The bios allows me to set the multiplier but upon boot does not use my setting. The multiplier it uses depends upon where I set the FSB. I can only get 2.66 from this rig on this board.
I got 2.8 from it easily in my asus533 board. The asus now is running a 1.5 @ 2 with significantly lower quality agp and mem.. But I digress…..What’s up with the ABIT board?
Thanks in advance.
Here is the problem: The bios allows me to set the multiplier but upon boot does not use my setting. The multiplier it uses depends upon where I set the FSB. I can only get 2.66 from this rig on this board.
I got 2.8 from it easily in my asus533 board. The asus now is running a 1.5 @ 2 with significantly lower quality agp and mem.. But I digress…..What’s up with the ABIT board?
Thanks in advance.