- Joined
- Apr 3, 2003
I have:
1700+ DLT3C 0310WPMW
ASUS A7N8X-DLX rev 1.04 bios 1004 Uber
ANTEC TruPower 430
2 x 256 Mushkin Black PC3200 Level II
SLK-800U + SmartFan II
originally, this would not do 200 FSB no matter what voltage or multi I used. Since then, I have done several things. Removed the NB heatsink, removed the ASUS thermal bubble-gum that was in between it and the chip, put some AS3 on it, and added a fan on top it. I also added a small heatsink and fan (from an old GeForce2 MX) onto the SB (with AS3 as well). All the fans are running off the power supply, not off the board. The memory is in single channel right now. I am able to boot at 200 x 11 for example, but Prime95 gives errors. What I managed to accomplish so far is stability at 192 x 12.5 = 2400. Are there any more little tricks that I haven't done yet to bump me up to 200 stable? I know the VDD mod would probably do it, but thats way too advanced for me to even attempt to do.
Anything else I should do???
1700+ DLT3C 0310WPMW
ASUS A7N8X-DLX rev 1.04 bios 1004 Uber
ANTEC TruPower 430
2 x 256 Mushkin Black PC3200 Level II
SLK-800U + SmartFan II
originally, this would not do 200 FSB no matter what voltage or multi I used. Since then, I have done several things. Removed the NB heatsink, removed the ASUS thermal bubble-gum that was in between it and the chip, put some AS3 on it, and added a fan on top it. I also added a small heatsink and fan (from an old GeForce2 MX) onto the SB (with AS3 as well). All the fans are running off the power supply, not off the board. The memory is in single channel right now. I am able to boot at 200 x 11 for example, but Prime95 gives errors. What I managed to accomplish so far is stability at 192 x 12.5 = 2400. Are there any more little tricks that I haven't done yet to bump me up to 200 stable? I know the VDD mod would probably do it, but thats way too advanced for me to even attempt to do.
Anything else I should do???