Soltek FRN2-L Mobo
512 pc3200 Samsung DDR
Barton 2500+ AQXEA 0324
Volcano 9
GeforceFX5600 128 MB 360/600
My settings right now are these:
Multiplier+FSB 11x210=2315.2 mhz
Ram Timings 9-3-3-3 (These are the settings that the optimal mode gives me)
AGP Aperture size 128MB
AGP Frequency 70 mhz
Vcore 1.750 v
AGP Voltage 1.7 v
DIMM Voltage 1.7 v
VDD Voltage 1.7 v
Temps are 36 idle and 45 full load
My problem is that I can´t go past 210 with any multiplier from 10 to 11.5. I figure it´s the ram stopping me. Since I can´t change memory to 80% of the cpu fsb in the BIOS is there anyhting I could do to get past 210 FSB or squeeze a little extra out of it since my temps aren´t that high?
Any help and hints are most welcome
KK
512 pc3200 Samsung DDR
Barton 2500+ AQXEA 0324
Volcano 9
GeforceFX5600 128 MB 360/600
My settings right now are these:
Multiplier+FSB 11x210=2315.2 mhz
Ram Timings 9-3-3-3 (These are the settings that the optimal mode gives me)
AGP Aperture size 128MB
AGP Frequency 70 mhz
Vcore 1.750 v
AGP Voltage 1.7 v
DIMM Voltage 1.7 v
VDD Voltage 1.7 v
Temps are 36 idle and 45 full load
My problem is that I can´t go past 210 with any multiplier from 10 to 11.5. I figure it´s the ram stopping me. Since I can´t change memory to 80% of the cpu fsb in the BIOS is there anyhting I could do to get past 210 FSB or squeeze a little extra out of it since my temps aren´t that high?
Any help and hints are most welcome
KK