First watercooling setup

ObiwanShinobi · Apr 10, 2006

Ok I have a thermaltake armor case and I'm going to buy a watercooling setup for my processor. This is what I'm going to order:
http://www.dangerdenstore.com/product.php?productid=170&cat=69&page=1
http://www.dangerdenstore.com/product.php?productid=162&cat=72&page=1
http://www.dangerdenstore.com/product.php?productid=172&cat=33&page=1(how much of this do I need?)
http://www.dangerdenstore.com/product.php?productid=62&cat=33&page=1( how much of this do I need?)
http://www.frozencpu.com/fan-163.html x2
http://www.frozencpu.com/ex-liq-09.html
Is this all I need or am I missing anything? And is there anydirections or tips anyone has for installing this in a Thermaltake armor case?

1twelve2 · Apr 10, 2006

Reseviour (spelling) or a T-Line to fill your loop. I got the TDX+D5 combo and a BIP2 rad. i am VERY pleased. I got a 10*C drop in temps from my Thermaltake Aquarius kit. (1/4'' to 1/2'' ID tubing makes alot of difference)

i dont know about installation in a Tt Armor case, but be sure your fans will fit on the rad together.

other than a res or a T-Line, i think your set.

-aDaM^ · Apr 10, 2006

ObiwanShinobi said:
Ok I have a thermaltake armor case and I'm going to buy a watercooling setup for my processor. This is what I'm going to order:
http://www.dangerdenstore.com/product.php?productid=170&cat=69&page=1
http://www.dangerdenstore.com/product.php?productid=162&cat=72&page=1
http://www.dangerdenstore.com/product.php?productid=172&cat=33&page=1(how much of this do I need?)
http://www.dangerdenstore.com/product.php?productid=62&cat=33&page=1( how much of this do I need?)
http://www.frozencpu.com/fan-163.html x2
http://www.frozencpu.com/ex-liq-09.html
Is this all I need or am I missing anything? And is there anydirections or tips anyone has for installing this in a Thermaltake armor case?

I would buy about 12 feet of tygon, its nice to have extra.
I would buy like 20 clamps they come in handy, you probably only NEED 9 or 10 though.

and what you picked out looks good

1twelve2 · Apr 10, 2006

-aDaM^ said:
........and what you picked out looks good

ditto

Haste266 · Apr 10, 2006

uv red pc ice looks orange/pink(more orange though) under uv light.
everything looks good. i would buy worm drive clamps instead of those plastic pos clamps though.

Daddyjaxx · Apr 10, 2006

Worm clamps really are not necessary, although I use some on the CPU and GPU, with the new perfect seal fittings. CPU Killer at DD suggests they can be used without any clamps at all. Trust me, the fit is tight. So tight, I had to cut the tubing and get the remnant off with needle nose. I do use the plastic ones on the pump and rad ( a leak in any of those would be non harming), and have had zero problems.

ObiwanShinobi · Apr 10, 2006

So what resivour or T line should I get?

1twelve2 · Apr 10, 2006

something that is easy to fill... im not too sure on that right now, because im having an issue with my res as we speak. lol

ObiwanShinobi · Apr 10, 2006

like this?
http://www.dangerdenstore.com/product.php?productid=52&cat=27&page=1

ObiwanShinobi · Apr 10, 2006

so hows it looking? I want to make sure everything is right before I order it I dont want to waste my money.

First watercooling setup

ObiwanShinobi

Member

1twelve2

Member

-aDaM^

Disabled

1twelve2

Member

Haste266

Member

Daddyjaxx

Member

ObiwanShinobi

Member

1twelve2

Member

ObiwanShinobi

Member

ObiwanShinobi

Member

Similar threads