- Joined
- Jun 11, 2006
- Location
- Stoughton, MA
I finally removed the IHS from my opty 165. When I put everythign back together and laid in some fresh AS5 and put the APOGEE back on. THe temps were remarkably lower. The first time I ran orthos and core temp the temps were within 1'c of each other. Now tis back to being as much as 10 degrees off. Core 0 being the hot core and core 1 being the cold core. On load I am getting roughly 39 on core 0 and 31 on core 1. Any ideas on why core 0 could be so high? I've even tried running a stress test and messing with the mounting screws.
Have any suggestions on what else I could try to even out the temps?
Have any suggestions on what else I could try to even out the temps?