- Joined
- Jul 16, 2004
- Location
- uxbridge, London, UK
i know this could probablly go in the storage section but i feel its more to do with networking.
i've been looking all over the web for a good guide / explanation of NAS (network attached storage) and SAN (storage area network) but couldnt find one anywhere.
i have a close contact at dell advanced server support and was asking him to explain it to me, expecting a 2 line email back but what i actually got is fantastic.
i just thought i would put it on here for anyone else who is looking for answers!
i would credit him but maybe dell wouldnt like that as this is more of a personal opinion...
i've been looking all over the web for a good guide / explanation of NAS (network attached storage) and SAN (storage area network) but couldnt find one anywhere.
i have a close contact at dell advanced server support and was asking him to explain it to me, expecting a 2 line email back but what i actually got is fantastic.
i just thought i would put it on here for anyone else who is looking for answers!
i would credit him but maybe dell wouldnt like that as this is more of a personal opinion...
No problem at all Michael,
I've been looking for a NAS v SAN document to send you but couldn't find any external facing docs that solely deal with that distinction. So, here it is: ;-)
NAS - Network Attached Storage
All systems which connect to the NAS system do so through the public network (ethernet etc). This is an easy solution to implement and is normally just a case of racking the system, connecting it up, configuring it on the network, creating your shares and away you go. It's basically adding another dedicated file server onto the network with extra storage. But there are other benefits, Storage Server 2003 comes with all the OS clients installed so Unix/Linux/Netware/Apple/Windows users can all access the storage. Also, there are no limits on the amount of clients that can attach to the NAS system so you do not need to worry about CAL's. Finally, the NAs systems have a web based management utility where you can configure the system over the network without needing to know Windows inside and out. (Good for Linux people who have strong opinions on using Windows ;-)
SAN - Storage Area Network
A SAN is where a dedicated high speed network interconnects the servers and storage and is not part of the public network. Generally, SAN's are fibre based which provide higher speed/bandwidth then ethernet. This enables System Administrators to consolidate their storage from multiple servers onto one storage system, which means less configuration, easier to manage and simpler backup strategies. However historically SAN implementations were a lot more expensive than NAS due to the cost of fibre hba's, switches, cabling etc etc.
The AX100 mixes SAN/NAS technology, it comes in two flavours iscsi and fibre. The iscsi and fibre relate to how the AX100 connects to the network. To deploy a fibre AX100 (fibre=speedier/higher bandwidth) you would need to buy Fibre hba's for each server which will be using the server, Fibre switch (Not cheap!) and Fibre cables. Thats without mentioning backup solutions.
The AX100i uses the iscsi protocol which means it can use existing Ethernet networks to attach to the servers. However, the ethernet switch must be a gigabit one and cat5e cables used, Dell also recommends that a dedicated gigabit switch is purchased and dual nics are installed in each server. This is so the data traffic between the ax100 and server is not on the public network which could reduce performance. (Though it is possible to use the AX100i on the same network as clients) This makes the AX100i a cheaper option as gigabit ethernet technology is cheaper than fibre. Finally, it is also possible for multiple sites to use the AX100i over a WAN once the network configuration allows it.
There are documents on the AX100 specs located at:
http://www1.euro.dell.com/content/products/productdetails.aspx/pvaul_ax100?c=uk&l=en&s=pad
PV745n documents:
http://www1.euro.dell.com/content/products/productdetails.aspx/pvaul_745n?c=uk&l=en&s=pad
Does this help at all? (I think I should have been a sales rep... ;-) In the end, the main considerations come down to:
a) How much storage do I need (including a % extra for future proofing for a couple of years)?
b) What performance level do I need?
c) Any specific business requirements
d) How much can I afford?
If you need to get a quote for the AX100 for comparison let me know because, I think a Rep would need to issue one as the website doesn't at the moment. It may also be necessary to consider changing your backup solution as well, if all your data is going to be centralised.