Overclockability of 2400+

Deus

Registered

​

Joined

May 27, 2002

Location

Dallas Tx

• Nov 10, 2002

• #41

1)AIUCB 0243
2)havent decided on mult and fsb yet, some stable ones that ive tried: 14x166 =2333, 18x134= 2412, 13x177 = 2305, and what im using now, 11.5x199=2289
3)corsair pc3200 512mb c2, fastest timings
4)1:1 right now, at 199, had it as high as 221 with 177fsb
5)epox 8k9a2
6)1.85/2.6
7)crappy watercooling, old overclockershideout stuff, 39/46C

 

markodude

Member

​

Joined

Jul 15, 2002

Location

Europe

• Nov 10, 2002

• #42

Highest Ive been so far on my AIUCB 0242, needs 2.00v, idle temp at this is 57c!! Any ideas on how I can lower my temps? - will a shim help? I think its because of the small core size as my coolermaster heat pipe + 7k rpm delta used to be up to the job of most Athlons!
I cant get any multiplier higher than 12.5 either, 14x and 15x give mne like 5x and 5.5x, I think ive shorted my 4th L3 bridge when unlocking 5th L3....

 

N

ntpphong

Member

​

Joined

Oct 12, 2002

Location

CA

• Nov 11, 2002

• #43

k, my updated o/c, but i aint pushing more out of this baby before i got a new hsf. ths volcano9 is lound as hell and doesnt have any use.

 

markodude

Member

​

Joined

Jul 15, 2002

Location

Europe

• Nov 11, 2002

• #44

watch your sig ntpphong - the mods will be onto you - no external links allowed except oc teams...
I had a look at yours and its lookin OK but what GC Core/mem you on? I was hoping to break 15k with my 2400+ and this Ti4600 card out one of my P4's.
http://service.madonion.com/compare?2k1=4981033

 

Q

qwerty57

BANNED TROLL-Silversinksam

Joined

Jun 28, 2002

• Nov 11, 2002

• #45

markodude> hope you get 15k Im shooting for 17,000 3dmarks with my ti4600 tommorow when my 2600+ 333mhz fsb cpu arrives.. at just 2004mhz cpu I run 15,780 3dmarks if my new cpu can run at 2400-2500mhz I have a shot. right now the AMD+nvidia record is 16,140 and thats going to fall quick good luck and Ill post back results later.

 

N

ntpphong

Member

​

Joined

Oct 12, 2002

Location

CA

• Nov 11, 2002

• #46

i have very big troubles o/cin this leadtek since it's sooo hot at stock speed already. i ran at stock speed. i tried oc it so many times but i wont success goin over 310/660 and that just SUCKS!!!

 

OP

W

wuzzapiman

Member

​

Joined

Oct 13, 2002

• Nov 11, 2002

• Thread Starter
• #47

The Albatron Turbo Ti4200 128Mb 3.3ns ram that im getting with my 2400+ is rumured to hit atleast 310/690 what kinda 3dmarks should i get with say.....12x200 CPU, 512 Corsair cas2 @ 400Mhz, Ti4200 128mb @ 320/700

Can i pull 15K w/ that setup?

 

N

ntpphong

Member

​

Joined

Oct 12, 2002

Location

CA

• Nov 11, 2002

• #48

why not just dl, install and try it?

 

[OC]Lucifer

Member

​

Joined

Jan 9, 2001

Location

Brainerd, Minnesota USA

• Nov 11, 2002

• #49

My clock..

1) AIUCB 0243
2) 15x149 = 2235
3) 1.25G Crucial PC2100
4) 1:1 Turbo settings, 2,2,2,5
5) Mobo Epox 8KHA+
6) 1.85/2.6
7) Thermalright AX7 w 120mm fan, 35C idle, 42 load
12,611 3dmarks

 

markodude

Member

​

Joined

Jul 15, 2002

Location

Europe

• Nov 12, 2002

• #50

First 0243 Ive seen - nice OC on air Lucifer....
Qwerty - Hope you hit 17k mate, I maybe should aim for more since I have never tried the 2400+ and Ti4600 yet! Let us know how you get on with the 2600+ you lucky sod!
Cheers for now

 

EluSiOn

Member

​

Joined

Oct 31, 2002

Location

SC, USA

• Nov 12, 2002

• #51

Benchmark done by Sandra 2003 Pro Win32 Unicode Edition

(1)AIUCB 0242 VPAW
(2)149 x 15 = 2235 mhz MBM5 report as 2249mhz
(3)DDR setting: Turbo (but Command Timing @ 2T)
(4)Mobo Epox 8kHA+
(5)Vcore 1.85/Vdmm 2.7
(6)Cooler Master HHC-001 Heat Pipe

However, I think I know what is handling me back to past system bus at 154mhz. It is my power supply, because MBM5 shows my 5V line is at 4.87~4.89.

** This system bus speed @ 149 produces better benchmark results than @ 150 ~152
** also I only use one stick of DDR as I suspect the other DDR stick is giving me problems