- Joined
- Feb 12, 2001
- Location
- Fayetteville, AR
Currently my 2.26b can boot at 17x176, that is at 2-5-2-2, vcore +15% and 2.7 mem v. Now on other AMD systems the mem has been able to boot up all the way up to 220mhz fsb, everyday setting was 185mhz fsb. In my Intel system it does not want to go higher then 176. I assume this is due to the locked multiplier, but I know the chip has more as the majority of 2.26b that I have dealt with and have seem overclocked usually top out about 3200 so im pretty sure there is more in store in the chip.
My 2 options for getting more out of it are 1: Vid Pin Mod for more vcore, but I dont think that is the issue personally. 2: Find a way to overclock the FSB more with the 3:4 setting.
On my BD7II I have the custom BIOS done by someone that I cant remember his name but he is very known for making great bios. 17x176 2-5-2-2, +15%vcore , 2.7mem, CPU is By SPD, and set to 1:1.
I am under the impression now that the 1:1 ratio means the CPU and the MEM run at 176 correct. So if 176 is the limit of the chip than I will not be able to go any higher, but if i set to 3:4 than the chip only runs at 75% or 3:4 of the mem speed? is that right?
At at 3:4 if I know my mem will do 200 and my chip will do 176 then I cna set mem at 200 3:4 and my chip will be running at 150 ?
My 2 options for getting more out of it are 1: Vid Pin Mod for more vcore, but I dont think that is the issue personally. 2: Find a way to overclock the FSB more with the 3:4 setting.
On my BD7II I have the custom BIOS done by someone that I cant remember his name but he is very known for making great bios. 17x176 2-5-2-2, +15%vcore , 2.7mem, CPU is By SPD, and set to 1:1.
I am under the impression now that the 1:1 ratio means the CPU and the MEM run at 176 correct. So if 176 is the limit of the chip than I will not be able to go any higher, but if i set to 3:4 than the chip only runs at 75% or 3:4 of the mem speed? is that right?
At at 3:4 if I know my mem will do 200 and my chip will do 176 then I cna set mem at 200 3:4 and my chip will be running at 150 ?