- Joined
- Sep 7, 2001
- Location
- Hudson Valley
The only problem I'm having with my new KK266+R is that the Jaton TNT2M64 keeps locking up. I've searched and seen mention from others with almost exactly the same problem but I don't think it's the memory (plain PC150) or the heat (39 Celsius) or any of that. Maybe it's the 250W PS. I'm working on building everything up. Better PS next, then an All-In-Wonder Radeon 8500DX whenever it comes out. Right now I am using my old Diamond Stealth II S220 4MB video card with no lockups at all. The only anomaly I can find is the PCI bus is running at 1/3 with the FSB at 133, which makes for 45MHz on the PCI. I cannot find anything to adjust the divisor to 1/4. This info from Sandra. So far no reply from Jaton tech support. The lockups with the Jaton occur at straight factory settings, default optimized, default fallback/safe settings, Athlon 1.2/266 (AMD HSF) overclocked to 1428MHz as it is now (136 x 10.5 @ 1.700V). When I remove the Jaton card the system works fine. The Jaton worked fine with my old Chaintech 5SSV mobo (SiS 530 chipset, AMD K6-2 400). This is just driving me nuts. Without the fallback card I'd be 5%|T out of luck. If I just have to wait to get the AGP card I dream of, OK. Just, anybody with info or advice, let me know. Thanks. Oh, and by the way, if you know what that extra unmarked jumper on the KK266+R is, between the CMOS battery and the LED pins, please let me know. It's driving me nuts and I'm itchy to just switch it to see what it does. But I'm not that much of a fool.