- Joined
- Jul 12, 2007
hi, the new ram I am wanting to buy is the G.Skill Ares 8GB 1866c9 low profile, primarily to fit under the big air cooler I'm intending to buy with the ram. The ram is about $50 atm, which is my current budget, but it can be $15-$25 more depending on the performance gain. Is this a good choice or should I go higher speed if it makes a noticeable performance difference at a reasonable cost, or back at 1600 if there is no significant difference at all?
In case you are wondering, I am building a semi-new gaming rig. The parts are a mix of old and new.
Antec 300 Illusion
Antec Neo Eco 620c (3 yrs old FWIW, hopefully this will have a few more years in it)
AMD mobo ---> ASRock Z97 Killer
AMD Phenom II X4 960T OC @ 4GHz ---> i5-4690k OC @ 4.5ghz
Hyper 212 EVO ---> Phanteks PH-TC14PE (in the unlikely event the CPU needs 1.35V to reach 4.5Ghz, and it's $55 AR atm )
AMD GPU ---> EVGA GTX 970 SSC ACX 2.0+ (04G-P4-3975-KR) OC +100mhz
G.Skill Ripjaws X 8gb 1600c9 (won't work with the new cooler, even if fan is moved above it, it will protrude outside the case according to my calculations) ---> G.Skill Ares 8GB 1866c9 (to fit under the Phanteks cooler )
In case you are wondering, I am building a semi-new gaming rig. The parts are a mix of old and new.
Antec 300 Illusion
Antec Neo Eco 620c (3 yrs old FWIW, hopefully this will have a few more years in it)
AMD mobo ---> ASRock Z97 Killer
AMD Phenom II X4 960T OC @ 4GHz ---> i5-4690k OC @ 4.5ghz
Hyper 212 EVO ---> Phanteks PH-TC14PE (in the unlikely event the CPU needs 1.35V to reach 4.5Ghz, and it's $55 AR atm )
AMD GPU ---> EVGA GTX 970 SSC ACX 2.0+ (04G-P4-3975-KR) OC +100mhz
G.Skill Ripjaws X 8gb 1600c9 (won't work with the new cooler, even if fan is moved above it, it will protrude outside the case according to my calculations) ---> G.Skill Ares 8GB 1866c9 (to fit under the Phanteks cooler )