- Joined
- Sep 20, 2001
- Location
- Minneapolis
HI! My name is OC-Elmo, and I want to show all of you how to properly install a HSF!
First, put the HSF on top of the CPU and look at the clip:
Then, make sure the clip is secured to the plasic lug on one side (the side opposite where you put the screwdriver).
Next, on the other side of the HSF, carefully press down with the screwdriver on the clip, pushing the clip over the plastic lug. Be careful and use steady pressure. Do not let the screwdriver slip.
Check to make sure it is tight, and you have done it, Success!!!
First, put the HSF on top of the CPU and look at the clip:
Then, make sure the clip is secured to the plasic lug on one side (the side opposite where you put the screwdriver).
Next, on the other side of the HSF, carefully press down with the screwdriver on the clip, pushing the clip over the plastic lug. Be careful and use steady pressure. Do not let the screwdriver slip.
Check to make sure it is tight, and you have done it, Success!!!
Last edited: