Q6600 OC results

Well, I'm pretty blown away with these results. I will run Prime95 overnight, but it seems pretty stable. I noticed that the multiplier fluctuates in CPUZ, but under load it shows the full 9X.

I ran Prime95 for about half an hour, and temps topped at 72C once on one proc.

The multiplier fluctuation is the C1E feature.

Turn it off so it doesn't throttle.

Thanks for the tip, that did the trick.

I ran Prime95 for 10 hours, no problems with very brief temp spikes at 73C. I'm calling this good enough.

I still can't believe all the headroom in this chip!