what is the latest PCB version for A7V333

Does anyone know what is the latest PCB version for A7V333. My current system uses Epox 8k3a. I actually bought the 2 kt-333 boards at the same time and set up the PC with A7V333 first and then set it again with 8k3a for comparision purpose. To my surprise, 8k3a is more stable (I can OC it @ 186x10 with RAM @2-2-2-5-1 for 24 hours) than A7V333.

My A7V333 is rev. 1.01 and I am planning to build another system for my daughter using this board and G3 ti500 (retired from the PC with 8k3a) and Kingmax PC2700 (retired with the same reason).

I still want to OC it a little. However, I am little concerned about the stability. So, I am thinking that there may be newer rev that run more stable than rev1.01? I will appreciate the input from people in this great forum.


Epox 8k3a+ (rev. 1.2)
AMD 2000XP
LeadTek Ti4600
Corsair XMS3000 -- 199 @ 2-2-2-5-1
Kingmax PC2700 -- 180 @ 2-2-2-5-1
TwinMos PC2700 (Windbond chip stamping A version) -- fail @ 2-2-2-5-1
Samsung PC2700 (ATP designed; still waiting for Samsung original) -- 201 @ 2-2-2-5-1
CoolerMaster ATC210 modified with 8 fans
Thermalright AX-7 with Delta 80CFM
PC mods rheobus 4 channel fan controller (17W per channel)
digiDoc5 for temp hardware monitoring
1 x IBM ATA 100 HD ; 2 Maxtor ATA-133 HDs
Toshiba 16x DVD and Pelxter CD-ROM

MV99

if you haven't upgraded to the 1006 bios, do so, it improves stability a LOT! Mine runs rock solid 9 x 166 FSB. Have no clue as to revisions, but had it since if was first released.

sethpa