- Joined
- Apr 7, 2002
- Location
- Norway, the red house, under the bed
Can someone please list the best settings for performance on this board using an 1.8 NW with an OC to about 533 speed?
-
Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!
Bios settings on an th7II and 1.8 NW?
- Thread starter JohnDoemakt
- Start date
- Joined
- Jan 11, 2002
- Location
- tOLEDO, OHIO, the heart of it all!
simple, first try with mem at 4x and try with default voltage, 1.5v. if that doesnt work, you might need to set the voltage to 1.55v, because the board has a .4v drop on it, and then try again with the mem at 4x. if that still does not work, keep the voltage the same, and try with mem on 3x. that should get the job done. the purpose of this is to see if your mem will run at 1066, and your chip should run at that speed at default voltage or just above.JohnDoemakt said:
OP
- Joined
- Apr 7, 2002
- Location
- Norway, the red house, under the bed
- Thread Starter
- #3
how about all the other bios settings that has to do with performance?
