Can anyone give me the best oc config for my system?

[xbxhkz]

Im fairly new to overclocking, and want to quickly oc my system and was hoping someone here could post a safe oc setting for my system. Here is all the info I have collected:


-------------------------
CPU-Z version 1.44.1
-------------------------

Processors Map
------------------------------------------------------------------------------------

Number of processors 1
Number of threads 2

Processor 0
-- Core 0
-- Thread 0
-- Core 1
-- Thread 0


Processors Information
------------------------------------------------------------------------------------

Processor 1 (ID = 0)
Number of cores 2 (max 2)
Number of threads 2 (max 2)
Name AMD Athlon 64 X2 4200+
Codename Brisbane
Specification AMD Athlon(tm) 64 X2 Dual Core Processor 4200+
Package Socket AM2 (940)
CPUID F.B.2
Extended CPUID F.6B
Brand ID 4
Core Stepping BH-G2
Technology 65 nm
Core Speed 2256.7 MHz (11.0 x 205.2 MHz)
HT Link speed 1025.8 MHz
Stock frequency 2200 MHz
Instructions sets MMX (+), 3DNow! (+), SSE, SSE2, SSE3, x86-64
L1 Data cache 2 x 64 KBytes, 2-way set associative, 64-byte line size
L1 Instruction cache 2 x 64 KBytes, 2-way set associative, 64-byte line size
L2 cache 2 x 512 KBytes, 16-way set associative, 64-byte line size
FID/VID Control yes
max FID 11.0x
max VID 1.300 V
Features XD, VT
K8 Thermal sensor yes
K8 Revision ID 6.0
Attached device PCI device at bus 0, device 24, function 0
Attached device PCI device at bus 0, device 24, function 1
Attached device PCI device at bus 0, device 24, function 2
Attached device PCI device at bus 0, device 24, function 3



Chipset
------------------------------------------------------------------------------

Northbridge NVIDIA MCP61 rev. A3
Southbridge NVIDIA MCP61 rev. A2
Graphic Interface PCI-Express
PCI-E Link Width x8
PCI-E Max Link Width x16
Memory Type DDR2
Memory Size 4096 MBytes
Channels Dual
Memory Frequency 322.4 MHz (CPU/7)
CAS# 5.0
RAS# to CAS# 5
RAS# Precharge 5
Cycle Time (tRAS) 15
Bank Cycle Time (tRC) 21
Command Rate 1T


Memory SPD
------------------------------------------------------------------------------

DIMM #1

General
Memory type DDR2
Module format Regular UDIMM
Manufacturer (ID) Transcend Information (7F4F000000000000)
Size 2048 MBytes
Max bandwidth PC2-5300 (333 MHz)
Part number JM667QLU-2G
Serial number 0007B58E
Manufacturing date Week 01/Year 08

Attributes
Number of banks 2
Data width 64 bits
Correction None
Nominal Voltage 1.80 Volts
EPP no
XMP no

Timings table
Frequency (MHz) 200 266 333
CAS# 3.0 4.0 5.0
RAS# to CAS# delay 3 4 5
RAS# Precharge 3 4 5
TRAS 9 12 15
TRC 12 16 20

DIMM #2

General
Memory type DDR2
Module format Regular UDIMM
Manufacturer (ID) Transcend Information (7F4F000000000000)
Size 2048 MBytes
Max bandwidth PC2-5300 (333 MHz)
Part number JM667QLU-2G
Serial number 0007B58E
Manufacturing date Week 02/Year 08

Attributes
Number of banks 2
Data width 64 bits
Correction None
Nominal Voltage 1.80 Volts
EPP no
XMP no

Timings table
Frequency (MHz) 200 266 333
CAS# 3.0 4.0 5.0
RAS# to CAS# delay 3 4 5
RAS# Precharge 3 4 5
TRAS 9 12 15
TRC 12 16 20



Monitoring
------------------------------------------------------------------------------

Mainboard Model M61SME-S2 (0x24B - 0x29C99C8)



Hardware monitor
-----------------------------------------------------

ITE IT87 hardware monitor

Voltage sensor 0 1.26 Volts [0x4F] (CPU VCORE)
Voltage sensor 1 1.90 Volts [0x77] (VIN1)
Voltage sensor 2 3.34 Volts [0xD1] (+3.3V)
Voltage sensor 3 5.08 Volts [0xBD] (+5V)
Voltage sensor 4 12.10 Volts [0xBD] (+12V)
Voltage sensor 5 -12.86 Volts [0xC9] (-12V)
Voltage sensor 6 -0.38 Volts [0x6] (-5V)
Voltage sensor 7 5.00 Volts [0xBA] (+5V VCCH)
Voltage sensor 8 3.09 Volts [0xC1] (VBAT)
Temperature sensor 0 38°C (100°F) [0x26] (TMPIN0)
Temperature sensor 1 37°C (98°F) [0x25] (TMPIN1)
Temperature sensor 2 34°C (93°F) [0x22] (TMPIN2)
Fan sensor 0 1929 RPM [0x15E] (FANIN0)
Fan sensor 1 1170 RPM [0x241] (FANIN1)


Hardware monitor
-----------------------------------------------------

AMD Athlon 64 X2 4200+ hardware monitor

Temperature sensor 0 14°C (56°F) [0xFA] (core #0)
Temperature sensor 1 18°C (63°F) [0x10A] (core #1)

Dump hardware monitor



Hardware monitor
-----------------------------------------------------

Radeon X1650 Series hardware monitor

Temperature sensor 0 49°C (120°F) [0x31] (GPU Core)

Dump hardware monitor




HyperTransport Capability
Offset 44h
Revision 1.03
Interface type Slave/Primary
Link 0 width (in/out) 16 bits/16 bits
Link 0 frequency 1000MHz
Link 1 width (in/out) 8 bits/8 bits
Link 1 frequency 200MHz
HyperTransport Capability
Offset DCh
Interface type MSI Mapping


PCI Express Capability
Offset 80h
Device type Root Port of PCI-E Root Complex
Port 0
Version 1.0
Physical slot #0
Presence detect yes
Link width 8x (max 16x)

DMI
------------------------------------------------------------------------------

DMI BIOS
--------
vendor Award Software International, Inc.
version F9b
date 01/22/2008


DMI System Information
----------------------
manufacturer Gigabyte Technology Co., Ltd.
product M61SME-S2
version unknown
serial unknown
UUID 30303144-37444242-31414346-FFFFFFFF


DMI Baseboard
-------------
vendor Gigabyte Technology Co., Ltd.
model M61SME-S2
revision unknown
serial unknown


DMI System Enclosure
--------------------
manufacturer Gigabyte Technology Co., Ltd.
chassis type Desktop
chassis serial unknown


DMI Processor
-------------
manufacturer AMD
model AMD Athlon(tm) 64 X2 Dual Core Processor 4200+
clock speed 2255.0MHz
FSB speed 205.0MHz
multiplier 11.0x


DMI Memory Controller
---------------------
correction 64-bit ECC
Max module size 1024MBytes


DMI Memory Module
-----------------
designation A0
size 2048 MBytes (double bank)


DMI Memory Module
-----------------
designation A1
size 2048 MBytes (double bank)


DMI Port Connector
------------------
designation PRIMARY IDE (internal)
connector On Board IDE


DMI Port Connector
------------------
designation SECONDARY IDE (internal)
connector On Board IDE


DMI Port Connector
------------------
designation FDD (internal)
port type 8251 FIFO Compatible
connector On Board Floppy


DMI Port Connector
------------------
designation COM1 (internal)
port type Serial Port 16450
connector 9 Pin Dual Inline (pin 10 cut)
connector DB-9 male


DMI Port Connector
------------------
designation COM2 (internal)
port type Serial Port 16450
connector 9 Pin Dual Inline (pin 10 cut)
connector DB-9 male


DMI Port Connector
------------------
designation LPT1 (internal)
port type Parallel Port ECP/EPP
connector DB-25 female
connector DB-25 female


DMI Port Connector
------------------
designation Keyboard (internal)
port type Keyboard Port
connector PS/2


DMI Port Connector
------------------
designation PS/2 Mouse (internal)
designation Detected (external)
port type Mouse Port
connector PS/2
connector PS/2


DMI Port Connector
------------------
designation USB (internal)
port type USB
connector Access Bus (USB)


DMI Extension Slot
------------------
designation PCI
type PCI
width 32 bits
populated no


DMI Extension Slot
------------------
designation PCI
type PCI
width 32 bits
populated yes


DMI Physical Memory Array
-------------------------
location Motherboard
usage System Memory
correction None
max capacity 1024MBytes
max# of devices 2


DMI Memory Device
-----------------
designation A0
format DIMM
type unknown
total width 64 bits
data width 64 bits
size 2048 MBytes


DMI Memory Device
-----------------
designation A1
format DIMM
type unknown
total width 64 bits
data width 64 bits
size 2048 MBytes


Software
------------------------------------------------------------------------------

Windows Version Microsoft Windows Vista (6.0) Home Premium Edition (Build 6000)
DirectX Version 10.0

 

[||Console||]

Read the stickys . No one can tell you what your system will do 100% . Overclocking is trial and error .

Please make a Sig with all your parts listed including cooling .

 

[Niku-Sama]

wow thats alot of stuff, i swear i saw a thread just like this the other day.
any way what the above said. or edit the post above with the following.

Motherboard Model
CPU
Ram and the 4 major timings
Heatsink or other cooling
Video Card
PSU
Hard Drives and CD/DVD Drives
mabe something extra you have

no really need for every little detail like which way the capacitors are solderd on or the voltage or temp it is at the moment you found the info or all your local or bios setting either.

knowing the processor core name, in your case a brisbane, is helpful but alot of people cant figure that one out on the first time but you got it in there.

 

[Kuroimaho]

That's a Brisbane with a G2 core so 3G should be no problem for it, according to AMDcompare that CPU does not exist yet but that's not the only processor they have left out.

I recommend to test the limits of each component isolated, as it was already recommended read the stickies.

Drop down the cpu and the HT multiplier set the memory to 200Mhz and you can see what is the max HT your board can take. Then set the multi back to 11 and raise the HT frequency slowly lets say by 10 Mhz and see the maximum for you CPU and finally find the limit of your memory.