Intel 45nm Quad core CPU-Xeon X3320 OC test

[windwithme]

Intel Xeon X3320
45nm,L2 6MB,333X7.5=>2.5G

OC Quad core CPU-DFI LanParty DK P35-T2RS

CPU:INTEL XeonX3220
MB: DFI LanParty DK P35-T2RS
DRAM:CORSAIR TWIN2X2048-6400C4
VGA:MSI NX8800GT T2D256E
HD:Seagate 7200.10 320G
POWER:Corsair HX520W Modular Power Supply
Cooler:Thermaltake Max Orb

Default
CPU: 333X7.5=>2500Mhz
DRAM: DDRII 800 CL4 4-4-12

Super PI 1M&CPUMARK99

PCMARK2005

CrystalMark

CINEBENCH R10

CPUZ 1.40 show Q9300 is error

OC
1.328V 3.6G 4XSuper PI32M

 

[windwithme]

CPU: 480X7.5=>3600Mhz
DRAM: DDRII 1152 CL5 5-5-15

Super PI 1M&CPUMARK99

PCMARK2005

CrystalMark

CINEBENCH R10

CORSAIR TWIN2X2048-6400C4+DFI LanParty DK P35-T2RS=>???

DDRII 1180 CL5 5-5-15 2.3V
2XSP2004

Thanks

 

[Hazaro]

Woohoo! Server Q9300.

It's too bad because of the 7.5 multi, but hitting 3.6 @ 480FSB isn't bad at 1.33V.

Thanks

 

[w2richwood]

thanks for sharing wind
Rich

 

[kinitex]

What are the coretemp temperatures? Not that it really matters because these things aren't going passed 3.6ghz for 95% of its users.

 

[Evilsizer]

Wind,as always thanks for posting this up for us!
many for you!

 

[Shingoshi]

Has anyone used this chip with the Gigabyte 73PVM-S2??

I'm considering this chip to use on my board (Gigabyte 73PVM-S2). And to answer anyone who might be questioning my selection of board, it's because it was one of only a few that would fit in a Flex-ATX case.

I'm currently using an [email protected]. And I'm running my 4GBs ram at 900MHz. I'm using a Thermaltake Shuriken hsf. It barely fit in the case. My system runs quite cool, so I'm not to concerned about that. Just want to know if anyone has had success with this chip on my board.

Shingoshi