k7n2 delta overclocking

[azzamr2]

ok got bored and decided to overclock my old system specs are:

AMD athlon throroughbred 2600+
k7n2 delta islr mobo (however its spelt)
Geil 1gb dual channel kit ddr pc3200
geforce 7300 GT 512mb
antec case
20gb + 120gb ide hdd's

well i got the bug to play around with it obviously not to blow it up thats not my intention as its used everyday still just wanna push it abit more

any reccomendations on settings etc for overclocking this board and cpu/ram

ive clocked it to 2.11ghz at the mo just slightly increasing the FSB to 168 instead of 166 it was set at, FSBram is set at 5:6 running 204mhz standard setting were 200 well with it standard board setting it was 167mhz which is way down on what pc3200 should be running at i woulda thought!

any advice to get a little bit more out of the cpu etc???

 

[Angry]

Keep the ram ratio 1:1

It will give you a bit more room on the fsb,What heatsink are you using?
Im currently using this current combo for a few games while I build funds for a PII system. But Im limited due to the stock heatsink.

Best option is to try to get the FSB as high as you can and add vcore as you need it.
Basicly, if you up the FSB and it becomes upstable, add just a bit of Vcore.
But keep an eye on your temps. If it gets too hot, it will become unstable.