Hey everyone, ive had my EVGA nforce 790i ultra SLI for a couple of years now and i would like to give it a little extra boost of power for gaming and whatnot. i played with a few setting when i built it but im not sure what i did in the bios. can somone please take a look and see if theres anything that could use a tweak? im just mostly concerned about the voltages and if they are in the right spot or if they should be lowered. also what is the process while lowering voltage do you just take it one step at a time and run p95 till a crash occurs? Thanks alot in advanced 
Motherboard - EVGA nforce 790i Ultra SLI
CPU - Intel core 2 quad q6700 2.66Ghz
Memory - corsair 2stick 2gb 1600 9 9 9 24
GPU - EVGA geforce GTX 260
temps are 43 38 39 35 at idle
BIOS Version: * ? cant find it
**System **
CPU Freq, MHz: 3500.0 GHZ
FSB Reference Clock, MHz: 1400
CPU Multiplier: [10X]
PCle x16-1 & 16-2, MHz: [100]
PCle x16-3, MHz: [100]
SPPc->MCP Ref Clock, MHz: [200]
nForce SPP --> nForce MCP: [5X]
nForce SPP c-- nForce MCP: [5X]
**Spread Spectrum**
CPU Spread Spectrum: [Disabled]
HT Spread Spectrum: [Disabled]
PCle Spread Spectrurn(SPP): [Disabled]
PCle Spread Spectrurn(MCP): [Disabled]
SATA Spread Spectrum: [Disabled]
**FSB & Memorv Config**
FSB - Memory Clock Mode: [unlinked]
FSB - Memory Ratio: auto
FSB (QDR), MHz: [1400]
Actual FSB (QDR), MHz: 1400
x MEM (DDR), MHz: 1400
Actual MEM (DDR), MHz: 1400
P1: [AUTO]
P2: [AUTO]
** Advanced Memory Settings **
tRRD: [Auto]
tRC: [Auto]
tWR: [Auto]
tWTR: [Auto]
tFAW: [Auto]
tREF: [Auto]
tRFC:
**System Voltages**
CPU Core: [1.375 - 1.31]
CPU FSB: [1.30 - 1.30]
Memory: [1.65 - 1.65]
nForce SPP: [auto - 1.35]
nForce MCP: [auto - 1.50]
GTLVREF Lane 0: [Auto]
GTLVREF Lane 1: [Auto]
GTLVREF Lane 2: [Auto]
GTLVREF Lane 3: [Auto]
**CPU Configuration**
Limit CPUlD Maxval: Disabled
Intel Speedstep: Disabled
xPPM Mode: [Native]
CPU Thermal Control: [Disabled]
C1E Enhanced Halt State: [Disabled]
Execute Disable Bit: [Enabled]
Virtualization Technology: [Disabled]
CPU Core 0: [Enabled]
CPU Core 1: [Enabled]
CPU Core 2: [Enabled]
CPU Core 3: [Enabled]
Motherboard - EVGA nforce 790i Ultra SLI
CPU - Intel core 2 quad q6700 2.66Ghz
Memory - corsair 2stick 2gb 1600 9 9 9 24
GPU - EVGA geforce GTX 260
temps are 43 38 39 35 at idle
BIOS Version: * ? cant find it
**System **
CPU Freq, MHz: 3500.0 GHZ
FSB Reference Clock, MHz: 1400
CPU Multiplier: [10X]
PCle x16-1 & 16-2, MHz: [100]
PCle x16-3, MHz: [100]
SPPc->MCP Ref Clock, MHz: [200]
nForce SPP --> nForce MCP: [5X]
nForce SPP c-- nForce MCP: [5X]
**Spread Spectrum**
CPU Spread Spectrum: [Disabled]
HT Spread Spectrum: [Disabled]
PCle Spread Spectrurn(SPP): [Disabled]
PCle Spread Spectrurn(MCP): [Disabled]
SATA Spread Spectrum: [Disabled]
**FSB & Memorv Config**
FSB - Memory Clock Mode: [unlinked]
FSB - Memory Ratio: auto
FSB (QDR), MHz: [1400]
Actual FSB (QDR), MHz: 1400
x MEM (DDR), MHz: 1400
Actual MEM (DDR), MHz: 1400
P1: [AUTO]
P2: [AUTO]
** Advanced Memory Settings **
tRRD: [Auto]
tRC: [Auto]
tWR: [Auto]
tWTR: [Auto]
tFAW: [Auto]
tREF: [Auto]
tRFC:
**System Voltages**
CPU Core: [1.375 - 1.31]
CPU FSB: [1.30 - 1.30]
Memory: [1.65 - 1.65]
nForce SPP: [auto - 1.35]
nForce MCP: [auto - 1.50]
GTLVREF Lane 0: [Auto]
GTLVREF Lane 1: [Auto]
GTLVREF Lane 2: [Auto]
GTLVREF Lane 3: [Auto]
**CPU Configuration**
Limit CPUlD Maxval: Disabled
Intel Speedstep: Disabled
xPPM Mode: [Native]
CPU Thermal Control: [Disabled]
C1E Enhanced Halt State: [Disabled]
Execute Disable Bit: [Enabled]
Virtualization Technology: [Disabled]
CPU Core 0: [Enabled]
CPU Core 1: [Enabled]
CPU Core 2: [Enabled]
CPU Core 3: [Enabled]
