- Joined
- Jan 20, 2002
- Location
- Folding In Minnesota
Does any one know how to o/c this mb. I have a p3 600 and tried overclocking past 720 mghz. The m/b wont let me and it returns to 600. Can anyone help?
Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!
AEsnowboarding said:I guess nobody can help me
TUK101 said:That is strange, I have the same board with an 800 Celeron and I can OC at 133 fsb with no problems. I have another post on here asking for suggestions for a new board lol. I am not real happy with this board either. I was until I started having a hard time keeping all my drives working. One day it will be the floppy not working, the next it will be a CD-rom drive not working. Wierd huh. Same board different problems for us. I dont know what to tell you about your OC, except that try setting everything to default, then make your changes and save and exit. There is a setting in the bios on the right side of the options to set the bios to optimum settings, then just change your fsb, and ram timings if you are into that. Make sure to disable the sound (if you dont use the onboard) and disable the internet thing that it tries to load on you. Also make sure to turn fast writes on for the agp if your card can use it. Hope that helps.
Yes, that is all that I have in my bios is up to a 10% increase in voltage. Which in my opinion isnt much. And any time that I have increased the voltage My system has errors and boot problems, so I just stay away from that setting.Samzik said:
but can u chenge voltage ? do u have the % mod or u can chose volts ? i have some 1,2 ....10 %