- Joined
- Aug 30, 2004
- Location
- Santa Barbara, CA
Most of you folks who have been following my recent setbacks with my rig(s) would remember that I had 0 success with TCCD on the ASUS A8V. I found out the hard way that the ASUS A8V (VIA chipset) doesn't really like TCCD.
I got the DFI-Ultra D as an upgrade, thinking that it would allow more overclocking headroom. Needless to say I was struggling again. But, something good happened yesterday (about time!). I recieved my PDP XBLK in the mail and fired it up straight away.
I hit 287 (CPU limited as I'll lose my CPU clocks) out of the box at 2.7 V !!
It did take a fair bit of tweaking and many thanks to robowang over at DFI Forums (I copied some of his settings exactly). Burning in today with Memtest (3 passes 0 errors). The ones in orange were crucial to passing Test #8.
Genie Bios settings are as follows:
DRAM Timings:-
Ram Multi 200 1:1
CPC ENABLED
Tcl 2.5
Trcd 04
Tras 08
Trp 03
Trc 11
Trfc 22
Trrd 02
Twr 02
Twtr 01
Trwt 03
Tref 4708
Twcl 01
Bank Inter EN
Skew Control Auto (Off)
Drive Strength 07
Max Async Auto (8ns)
Read Preamble 05
Idle Cycle 256
Dyn Counter DIS
R/W Que Bypass 16X
Bypass MAx 7X
32 Bit Gran DIS
Voltages etc:-
HTT 286
LDT X3
Cpu Multi X9
PCE-I 100
Vcore Startup 1.500
Vcore 1.500
Vcore Special 110%
LDT V 1.3
Chipset V 1.7
Vdimm 2.7
More updates to follow!
I know this is nothing spectacular for you guys, but I cant help but
Edit:
3-10 BIOS. (Thanks Dread-Star!)
I got the DFI-Ultra D as an upgrade, thinking that it would allow more overclocking headroom. Needless to say I was struggling again. But, something good happened yesterday (about time!). I recieved my PDP XBLK in the mail and fired it up straight away.
I hit 287 (CPU limited as I'll lose my CPU clocks) out of the box at 2.7 V !!
It did take a fair bit of tweaking and many thanks to robowang over at DFI Forums (I copied some of his settings exactly). Burning in today with Memtest (3 passes 0 errors). The ones in orange were crucial to passing Test #8.
Genie Bios settings are as follows:
DRAM Timings:-
Ram Multi 200 1:1
CPC ENABLED
Tcl 2.5
Trcd 04
Tras 08
Trp 03
Trc 11
Trfc 22
Trrd 02
Twr 02
Twtr 01
Trwt 03
Tref 4708
Twcl 01
Bank Inter EN
Skew Control Auto (Off)
Drive Strength 07
Max Async Auto (8ns)
Read Preamble 05
Idle Cycle 256
Dyn Counter DIS
R/W Que Bypass 16X
Bypass MAx 7X
32 Bit Gran DIS
Voltages etc:-
HTT 286
LDT X3
Cpu Multi X9
PCE-I 100
Vcore Startup 1.500
Vcore 1.500
Vcore Special 110%
LDT V 1.3
Chipset V 1.7
Vdimm 2.7
More updates to follow!
I know this is nothing spectacular for you guys, but I cant help but
Edit:
3-10 BIOS. (Thanks Dread-Star!)