- Joined
- Aug 5, 2002
- Location
- Brisbane, Australia
Well with Corsair and OCZ announcing their new ram based on Samsung TCCD 4ns, XMS3200XL and OCZ PC3200 Plat rev2 rated at DDR400 2-2-2-5 and 2-2-2-8 respectively, I decided to pluck out my good old Corsair XMS3200C2v1.1 winbond BH-6 ram to do some comparison benchies
Using same additional ram cooling as my OCZ PC3500 Plat LE BH-5 at http://www.ocforums.com/showthread.php?t=299646 I proceeded to revisit Corsair XMS3200C2v1.1 BH-6 (batch/lot number 024151 = week 41, 2002).
2.8C SL6Z5 M0
Abit AI7 17bios
128MB Gigacube 9800PRO Extreme
80GB WD 800JB
550W Antec TrueControl PSU
ram cooled with 60x38mm delta 50cfm fan strapped to ram using masking tape as outlined here http://www.ocforums.com/showthread.php?t=299646
According to infra-red thermometer, heatspreaders are a cool 26-29C under memtest #5 looping load (most stress you can put of ram more stressfull that anything you can run in windows!)
Notes:
1. cpuz on AI7 reports wrong cpu/ram ratio when NB Strap 667fsb is used and swaps 1:1 and 5:4 around.
2.To run unbuffered you need to go to sandra mem module -> options and uncheck 9 boxes listed in my unbuffered screenie link below
-----------------------
Results = 2x 512MB XMS3200C2v1.1 BH-6 @ 240mhz 2-2-2-6
vdimm = 3.2v in bios (3.17-3.19v vdimm)
vAGP = 1.65v
NB Strap 667fsb
GAT = A-A-A-D-D
Sandra 2004 Pro SP1
Buffered
Unbuffered = 3625/3627 (unbuffered real speed of ram)
Pifast = 57.52s
SuperPi
2M = 1min 32s
16M = 16min 15s
32M = 35min 30s
Aida32 3.93
Read = 6101MB/s
Write = 2160MB/s
240mhz 2-2-2-6 at 3.18v 1:1 ratio
this is prime95 v23.8 x2 at 12hr 10min mark
more benches to come
Winbond BH-6 rules too!
Using same additional ram cooling as my OCZ PC3500 Plat LE BH-5 at http://www.ocforums.com/showthread.php?t=299646 I proceeded to revisit Corsair XMS3200C2v1.1 BH-6 (batch/lot number 024151 = week 41, 2002).
2.8C SL6Z5 M0
Abit AI7 17bios
128MB Gigacube 9800PRO Extreme
80GB WD 800JB
550W Antec TrueControl PSU
ram cooled with 60x38mm delta 50cfm fan strapped to ram using masking tape as outlined here http://www.ocforums.com/showthread.php?t=299646
According to infra-red thermometer, heatspreaders are a cool 26-29C under memtest #5 looping load (most stress you can put of ram more stressfull that anything you can run in windows!)
Notes:
1. cpuz on AI7 reports wrong cpu/ram ratio when NB Strap 667fsb is used and swaps 1:1 and 5:4 around.
2.To run unbuffered you need to go to sandra mem module -> options and uncheck 9 boxes listed in my unbuffered screenie link below
-----------------------
Results = 2x 512MB XMS3200C2v1.1 BH-6 @ 240mhz 2-2-2-6
vdimm = 3.2v in bios (3.17-3.19v vdimm)
vAGP = 1.65v
NB Strap 667fsb
GAT = A-A-A-D-D
Sandra 2004 Pro SP1
Buffered
Unbuffered = 3625/3627 (unbuffered real speed of ram)
Pifast = 57.52s
SuperPi
2M = 1min 32s
16M = 16min 15s
32M = 35min 30s
Aida32 3.93
Read = 6101MB/s
Write = 2160MB/s
240mhz 2-2-2-6 at 3.18v 1:1 ratio
this is prime95 v23.8 x2 at 12hr 10min mark
more benches to come
Winbond BH-6 rules too!
Last edited: