- Joined
- May 25, 2003
- Location
- Irving, Tx
I have an Abit NF-M2 Nview motherboard with a 3600+ Brisbane. I can't seem to get a good stable overclock with this combo though. I am using Crucial Ballistix PC8500. Can someone help me go over my settings in the bios to get this thing flying? I just ran Orthos on the blend test and it failed after about 7 minutes.
CPU External Clock - 240
Mult - 9.5x
PCIe Clock - 100mhz
CPU Core - 1.375
DDR2 2.3
DDR2 Ref - + 0.0%
Chipset Core - 1.32
SB Core Aux - 1.56
Hyper Transport - 1.2
Virtualization - Disabled
K8 <-> HT Speed - 3x
K8 <-> NB HT Width - Auto
NB <-> SB HT Speed - 3x
NB <-> SB HT Width - Auto
RAM Settings are on auto - 800-5-5-5-18-2T
Cool & Quiet - Disable
HPET Support - Enable
SSE/SSE2 Instructions - Enabled
System Bios Cachable - Enabled
I'd like to get this running at 2.7-3.0 to keep me from buying another comob (It will be Intel so HELP ME!)
CPU External Clock - 240
Mult - 9.5x
PCIe Clock - 100mhz
CPU Core - 1.375
DDR2 2.3
DDR2 Ref - + 0.0%
Chipset Core - 1.32
SB Core Aux - 1.56
Hyper Transport - 1.2
Virtualization - Disabled
K8 <-> HT Speed - 3x
K8 <-> NB HT Width - Auto
NB <-> SB HT Speed - 3x
NB <-> SB HT Width - Auto
RAM Settings are on auto - 800-5-5-5-18-2T
Cool & Quiet - Disable
HPET Support - Enable
SSE/SSE2 Instructions - Enabled
System Bios Cachable - Enabled
I'd like to get this running at 2.7-3.0 to keep me from buying another comob (It will be Intel so HELP ME!)
Last edited: