[wc] Gigabyte GeForce GTX 760 WindForce 3X OC 2GB GDDR5 (GV-N760OC-2GD Rev. 2.0)

[MisiekSR]

hello
Is there any chance for a full cover to the graphics card

Gigabyte GeForce GTX 760 OC Windforce 3X 2GB GDDR5 (GV-N760OC-2GD Rev. 2.0)

I have them locked together in SLI and is a little noisy in the heat of the summer ...

or maybe something separate GPU and something else on the RAM + supply section?

maybe someone performs the blocks for a custom?

you have any ideas


ps: Hi to all / this is my first post here

 

[ATMINSIDE]

Check here, if it's reference there are tons of blocks.

 

[MisiekSR]

From EK
Sorry, we have no plans to make any waterblocks for this position. Thank you.

 

[ATMINSIDE]

You'll be hard pressed to find a full cover for a GTX 760 that isn't reference.

Look into the NZXT G10, could suit your needs pretty well.

 

[MisiekSR]

can I use

http://www.ekwb.com/shop/blocks/vga-blocks/universal-vga-blocks/ek-thermosphere-acetal-nickel.html

plus

NZXT G10 ??


or

http://www.ekwb.com/shop/blocks/vga-blocks/universal-vga-blocks/ek-vga-supremacy-acetal.html

 

[ATMINSIDE]

The NZXT G10 is made for an AIO.

I wouldn't do a universal block, personally, as it doesn't cool the vRAM/VRM at all.

 

[MisiekSR]

and where I could buy 2 blocks to the gpu ?

I do not need the whole set just blocks compatible with this solution


or maybe something else?

 

[ATMINSIDE]

I'm sorry, I'm not sure what you're asking in that last post.

 

[MisiekSR]

It is sold without the block on the GPU
so I have something to choose - the manufacturer proposes to use a set (

NZXT Kraken X60, X40 Kraken
Corsair H105, H110, H90, H75, H55, H50
Antec: KUHLER H2O 920V4, 620V4 H2O KUHLER, KUHLER H2O 920, H2O 620 KUHLER
Thermaltake Water 3.0 Extreme, Water 3.0 Pro, Water 3.0 Performer, Water 2.0 Extreme, Water 2.0 Pro, Water 2.0 Performer
Zalman: LQ-320, LQ-315, LQ-310

I I do not need the whole set - only a block on gpu
I already have water cooling for the CPU it is to be only its extension

 

[ATMINSIDE]

I didn't know you already had an existing loop, it wasn't specified in the first post.

Can you list the full parts set for your loop?

 

[MisiekSR]

now i have

ek supreme hf (cpu block) ----> EK-CoolStream RAD XTX (360) ( radiator) -----> Reservoirs ------> EK-DCP 4.0 (12V DC Pump)

and I need something to SLI ( 2 x GTX 760 rev2)

 

[ATMINSIDE]

You'll need more radiator with those two GPU's in the loop.
I would plan to put in a 240 or 360 rad to help with the extra heat load.

I don't know which universal blocks are good, as I don't use them.

 

[MisiekSR]

many thanks for your help
can anyone else be terminated

I'm looking far the radiator / or two

and reflect on the development of the system

how to let go of the liquid? pump -> Graphics ---> Graphics ---> radiator ----> block on the CPU ---> radiator ----> reservoir --->

 

[GTXJackBauer]

Welcome to OCFs.

Loop order doesn't matter as long as the reservoir is before the pump being fed. On that note any universal block should work. Just make sure to check its within spec with your GPUs. Make sure to have decent air flow in the case for the VRMs sake.