I've got a 600Mhz Celeron cpu in an Asus cusl2-c mobo, with all 3 ram slots filled with PC133 ram :64,128,128MB. All 3 sticks are 133MHz(PC133) capable, but they are running at 100MHz(PC100).
I understand the celeron to be a decent oc'er, but can't say whats going on here w/r/t to ram. I've had it POSTa 801 Mhz, and work, but the RAM was still at 100.
It starts at:
600
9x
66:100:33
66/100/33
Depending on whether I set manual or 801MHz (600*1.333=~801), I see (if I remember)
9x 9x
66:100:33 OR 133:133:133
89/133/44 133/133/33
However the RAM, when I had it at 801 MHz, was at 100, therefore these theoretical ratios weren't going. I have the second option, which I have not tried setting BECAUSE I CANNOT SEE SETTING 133 vs. ORIG 66! I think I might have tried the first, but not HAVE affected the RAM. I will myself to try the 89 (*1.333, but not the "Manual or vice versa" 133. So back to the title of this thread. There seems to be a lot of ads for m/cs w/ celerons and pc133 ram though.
After reading Overclocking Guide , I've got a 64MB ATI 4XAGP 7200 vid card, and a IBM7200 30GB deskstar, irrelevant SB card, and good NIC, CD, FDD.
my #1 pc is a P4C800E-D, OCZ PC4200, Zalman 700Cu, dual Raptor, etc, and I screwed it too, w/ a 2.6C (DDR480 stable, not 560!!, for more money). So I need help.
I understand the celeron to be a decent oc'er, but can't say whats going on here w/r/t to ram. I've had it POSTa 801 Mhz, and work, but the RAM was still at 100.
It starts at:
600
9x
66:100:33
66/100/33
Depending on whether I set manual or 801MHz (600*1.333=~801), I see (if I remember)
9x 9x
66:100:33 OR 133:133:133
89/133/44 133/133/33
However the RAM, when I had it at 801 MHz, was at 100, therefore these theoretical ratios weren't going. I have the second option, which I have not tried setting BECAUSE I CANNOT SEE SETTING 133 vs. ORIG 66! I think I might have tried the first, but not HAVE affected the RAM. I will myself to try the 89 (*1.333, but not the "Manual or vice versa" 133. So back to the title of this thread. There seems to be a lot of ads for m/cs w/ celerons and pc133 ram though.
After reading Overclocking Guide , I've got a 64MB ATI 4XAGP 7200 vid card, and a IBM7200 30GB deskstar, irrelevant SB card, and good NIC, CD, FDD.
my #1 pc is a P4C800E-D, OCZ PC4200, Zalman 700Cu, dual Raptor, etc, and I screwed it too, w/ a 2.6C (DDR480 stable, not 560!!, for more money). So I need help.
Last edited:
