Wireless Card Stops

[Override1313]

I have been messing around with overclocking by changing the fsb and the multiplier and stuff. Currently I am running a 2600+ with 512mhz pc2700 and 512mhz pc3200. I have the fsb set to 170 and the multiplier to 12.5. Whenever I try to up the fsb any higher, strange things start happening with my wireless card. Like it won't connect to my router and if it does it only connects for a breif second then it disconnects. When I put the fsb back down to 170, the wireless card works fine and stays connected just fine. Does anyone know why this might be happening or how to solve this problem

THX

 

[SavageBasher]

You'll need to find out if you can lock the pci/agp bus.

 

[Override1313]

where can i find that out? I have a A7N8X Delux Revison 2.0 if that helps

 

[SavageBasher]

Read the instructions. It will be in the bios.

 

[gustav]

Somewhere in the bios, it should say AGP/PCI with a value to set to the right of that. set the value to 66.6mhz/33.3mhz.

heres a shot at part of the bios, it looks like it only has a agp lock....anyway, set that to 66mhz

http://hardocp.com/image.html?image=MTA3NDIyMjQzMGl1Q0NwRzdrRnpfMl8zX2wuanBn

 

[Override1313]

Well i have the agp locked @ 66mhz but i cant find the pci lock, (im assuming there isnt one). is there anyother way to lock it?

 

[cack01]

If AGP is at 66 then your PCI is at 33. Normally there is not a PCI lock, since the PCI bus and the AGP bus is directly related.

 

[Override1313]

So pci should be kindof locked? will it stay at 33?

 

[SavageBasher]

yes

 

[Override1313]

ok thanks for your help everyone