- Joined
- Nov 1, 2002
- Location
- KC. Mo
I have a Iceburg water kit with Koolance HDD and chipset blocks. The radiator has a 80mm fan with a opened blow hole on top of the case. I have a P4 2.53 at 2.7 right now. I have 800mhz rdram running at 3x which comes to a 433 fsb. Memory is at 39c, load. I now have a digital doc flat sensor on the bottom of the cpu block. It shows a temp of 32c, load. Bios says 45c. MM5 says 37c. I also have a sensor on the water res which shows 29c, load. Which one do I trust? The Doc, the BIOS or all of them? I also have a sensor on the HDD that is showing 30c, load. Case temp sensor shows 23c idle, 25c load.
I have hit the limit on fsb with out turning up the Vcore. I uped the Vcore .75v and it still wouldnt boot windows completely. I am at 1.55 Vcore if I remember correctly.
Any ideas why the .75 in Vcore wasnt enough? It seems 100% stable at 2.7 with stock Vcore. I burnt up a 2.0 the first time. (old bios said 26c load, new bios says 45c)
Would a better cpu water block be a good idea? (still using the iceburg block). I know I need to get 1066 rdram, but i think im going to change to a Asus dual channel ddr.
Oh yeh, SiSandra shows a 46c load on the cpu. This is all on a Iwill P4R533.
Thanks for any ideas...
I have hit the limit on fsb with out turning up the Vcore. I uped the Vcore .75v and it still wouldnt boot windows completely. I am at 1.55 Vcore if I remember correctly.
Any ideas why the .75 in Vcore wasnt enough? It seems 100% stable at 2.7 with stock Vcore. I burnt up a 2.0 the first time. (old bios said 26c load, new bios says 45c)
Would a better cpu water block be a good idea? (still using the iceburg block). I know I need to get 1066 rdram, but i think im going to change to a Asus dual channel ddr.
Oh yeh, SiSandra shows a 46c load on the cpu. This is all on a Iwill P4R533.
Thanks for any ideas...