n00b here... hi... and tia
wondering if this is good or bad:
pump out-->res-->heatercore-->cpu-->heatercore-->gpu-->pump in
i got the Innovatek Tank-O-Matic ( that i will screw 1/4" thread ~ 1/2" barbs on ) for the res and the 2 heatercores w/ 2 120mm panaflos each... i wanna use an Eheim 1250 to pump all this and 1/2" tubing for the system. maze4 cpu and maze3 gpu wb, as well.
just wanna cool the water coming from the cpu before it gets to the gpu. figured 2 heatercores wouldnt hinder flow too much... but i dont know about the res... seems like it would further chilly the water ( res will be outside the case, as will the pump and one hc. the hc between the cpu and gpu would be the only cooler inside the case ) in the cool basement air ( 70°F ).
wondering if this is good or bad:
pump out-->res-->heatercore-->cpu-->heatercore-->gpu-->pump in
i got the Innovatek Tank-O-Matic ( that i will screw 1/4" thread ~ 1/2" barbs on ) for the res and the 2 heatercores w/ 2 120mm panaflos each... i wanna use an Eheim 1250 to pump all this and 1/2" tubing for the system. maze4 cpu and maze3 gpu wb, as well.
just wanna cool the water coming from the cpu before it gets to the gpu. figured 2 heatercores wouldnt hinder flow too much... but i dont know about the res... seems like it would further chilly the water ( res will be outside the case, as will the pump and one hc. the hc between the cpu and gpu would be the only cooler inside the case ) in the cool basement air ( 70°F ).