- Joined
- Aug 15, 2003
- Location
- Athens/Greece
Last week I built my new PC.I used then the thermal compound that came with SLK 900 and left the HS on my Epox's NB.
My temp were ok (max 49C CPU, 35C NB) but I thought what the
hell let's get the lower.
So I bought some AS3 and an Iceberg for the NB.
I took off the SLK cleaned the old **** put AS3 on it etc.
I mounted the Iceberg on NB using AS3 of course.
Now my temps are 2C for both CPU and NB.
I know you'll say I put too much AS3 or that both HSF aren't sitted right.But I'm pretty sure nothing of the above is the case here.
Well that's it I just thought I should share this with you and maybe someone could come up with something...
My temp were ok (max 49C CPU, 35C NB) but I thought what the
hell let's get the lower.
So I bought some AS3 and an Iceberg for the NB.
I took off the SLK cleaned the old **** put AS3 on it etc.
I mounted the Iceberg on NB using AS3 of course.
Now my temps are 2C for both CPU and NB.
I know you'll say I put too much AS3 or that both HSF aren't sitted right.But I'm pretty sure nothing of the above is the case here.
Well that's it I just thought I should share this with you and maybe someone could come up with something...