- Joined
- Dec 17, 2002
- Location
- Vancouver, BC
I installed my new NF7-S and 2500+ last night and I've started to overclock as well...
Components:
Abit NF7-S rev 2
2500+ AXDA Y AGXEA 0330
Corsair PC3200 2x 256MB XMS ver1.1
WD 80G HD special edition
AX7 + H1A
Antec 430W PS
Northbridge has been taken down and AS was applied. I also have a HS + 40 mm fan installed on the southbridge.
Right now ram timing is at 11-2-2-2
BIOS Cachable is disabled.
Video cachable is disabled.
AGP 128MB
FSB Sptread Spectrum is disabled.
AGP spectrum is disabled.
CPU Thermal is disabled.
Enhance PCI: disabled.
CPU Disconnect: enabled.
AGP data transfer rate: auto
AGP fast write; enabled.
3.13 Unified drivers, Windows XP.
I am able to hit 11*200 no problem with 7-2-2-2 timing. I tried 11*210 with the same timing and had no problem. I then tried 11*215 and windows locked up (XP). I then tried 11.5*210 and it locked up. I then played around with the timing (8-3-3-2) and tried 11.5*205 (locked up), 11.5*200 (lock up...I think). Right now I'm running 11*213 and no problem yet.
Knowing that my ram is rev 1.1 and most ppl with this ran to ~220 FSB, what should I do to maximize my overclock? I want highest MHz as possible but also good memory bandwidth.
Thanx for the helps!
Components:
Abit NF7-S rev 2
2500+ AXDA Y AGXEA 0330
Corsair PC3200 2x 256MB XMS ver1.1
WD 80G HD special edition
AX7 + H1A
Antec 430W PS
Northbridge has been taken down and AS was applied. I also have a HS + 40 mm fan installed on the southbridge.
Right now ram timing is at 11-2-2-2
BIOS Cachable is disabled.
Video cachable is disabled.
AGP 128MB
FSB Sptread Spectrum is disabled.
AGP spectrum is disabled.
CPU Thermal is disabled.
Enhance PCI: disabled.
CPU Disconnect: enabled.
AGP data transfer rate: auto
AGP fast write; enabled.
3.13 Unified drivers, Windows XP.
I am able to hit 11*200 no problem with 7-2-2-2 timing. I tried 11*210 with the same timing and had no problem. I then tried 11*215 and windows locked up (XP). I then tried 11.5*210 and it locked up. I then played around with the timing (8-3-3-2) and tried 11.5*205 (locked up), 11.5*200 (lock up...I think). Right now I'm running 11*213 and no problem yet.
Knowing that my ram is rev 1.1 and most ppl with this ran to ~220 FSB, what should I do to maximize my overclock? I want highest MHz as possible but also good memory bandwidth.
Thanx for the helps!