Running a mobile barton on NF7-S
11.5x211 fsb
1.7 vcore, 2.8 vdimm
corsair 3200LL v1.2 2-3-2-11
cpu temp 53 C stable with prime 95
thermalright sp97 panaflow 92 mm medium speed fan
overture case with an additional 92 mm exhaust fan in the floor (hole drilled between hd cage and cdr cage)
why are there different fractions that amount to the same thing---3/3, 4/4, 5/5, 6/6- in the bios? I ask because i want to go higher on the fsb but cant- i think its my corsair ch5. so i'll raise the multi but obviously have to downgrade the mem speed. which divider works best for this mobo?
Also, just raising the vcore to >1.9 (with settings that otherwise work-like those above) causes all sorts of beeping (long-short siren) on boot. I was exploring the limits of the mobo-cpu and i guess the mobile bartons dont like too much juice.
11.5x211 fsb
1.7 vcore, 2.8 vdimm
corsair 3200LL v1.2 2-3-2-11
cpu temp 53 C stable with prime 95
thermalright sp97 panaflow 92 mm medium speed fan
overture case with an additional 92 mm exhaust fan in the floor (hole drilled between hd cage and cdr cage)
why are there different fractions that amount to the same thing---3/3, 4/4, 5/5, 6/6- in the bios? I ask because i want to go higher on the fsb but cant- i think its my corsair ch5. so i'll raise the multi but obviously have to downgrade the mem speed. which divider works best for this mobo?
Also, just raising the vcore to >1.9 (with settings that otherwise work-like those above) causes all sorts of beeping (long-short siren) on boot. I was exploring the limits of the mobo-cpu and i guess the mobile bartons dont like too much juice.