So I have this stick of KVR DDR333 RAM, and I'm OCing it to 400mhz and feeding it 2.8v on aggressive settings. It's still rock solid. So I'd like to see if I can get the latency timings down some more, but my BIOS doesn't have the option! ARG! Am I getting the shaft by my Motherboard, or is there another way to force the timings? This RAM's SPD looks like this:
At 200mhz the timings are:
Frequency (MHz) 200
CAS# 2.5
RAS# to CAS# delay 4
RAS# Precharge 4
TRAS# 6
I want to try and get them lower. Any ideas? (This is system #1 in my sig btw).
Module #1
General
Memory type DDR-SDRAM
Manufacturer (ID) Kingston (7F98000000000000)
Size 512 MBytes
Max bandwidth PC2700 (166 MHz)
Part number K
Attributes
Number of banks 2
Data width 64 bits
Correction None
Registered no
Buffered no
Timings table
Frequency (MHz) 133 166
CAS# 2.0 2.5
RAS# to CAS# delay 3 3
RAS# Precharge 3 3
TRAS# 6 7
At 200mhz the timings are:
Frequency (MHz) 200
CAS# 2.5
RAS# to CAS# delay 4
RAS# Precharge 4
TRAS# 6
I want to try and get them lower. Any ideas? (This is system #1 in my sig btw).