- Joined
- Oct 18, 2003
Hey, I was just wondering what power supply to buy for mine. I thought I had a good one. It gave stable voltages at load within .1-.2 volts on another motherboard, but it used the 12 volt rail on that motherboard. On the epox, the 3.3 volt line is 2.75 at load! The 12 volt line (not being used) is at 13.2 volts, and the 5 volt line is at 4.75! I'm not able to go past 170 fsb like this with at 12.5 multiplier too. Volts for the processor are set to 1.9 but it is actually 1.57. For ram it is 2.9, actually 2.4.
Last edited: