- Joined
- Aug 29, 2002
First of all... thanks to Ross for setting me in the right direction.
I now have my 660 running nicely on a new P5WD2-Premium board with a pair of 512 Crucial Ballistic's, a couple of W/D SATA2 250's in a RAID0 array, all powered up by an Enermax Noisetaker 600.
Currently using the 509 BIOS, with default settings, except for the following...
FSB is @ 300
Mem is @ 750
PCI is @ 33.3
4.2Ghz ... Prime stable (but a bit temp limited) at 56 - 62 degrees for 2 hrs (enough for me for the moment with my XP90... wait until the new Zalman's are available here!)
Don't know how to tighten things up from here, but Sandra results are...
cpu Dhrystone: 12487 Whetstone: 5114/8957
mem ... just re-checking after a reboot.
Should I start playing with memory timings, or just leave it and wait until I get a better cooler?
I now have my 660 running nicely on a new P5WD2-Premium board with a pair of 512 Crucial Ballistic's, a couple of W/D SATA2 250's in a RAID0 array, all powered up by an Enermax Noisetaker 600.
Currently using the 509 BIOS, with default settings, except for the following...
FSB is @ 300
Mem is @ 750
PCI is @ 33.3
4.2Ghz ... Prime stable (but a bit temp limited) at 56 - 62 degrees for 2 hrs (enough for me for the moment with my XP90... wait until the new Zalman's are available here!)
Don't know how to tighten things up from here, but Sandra results are...
cpu Dhrystone: 12487 Whetstone: 5114/8957
mem ... just re-checking after a reboot.
Should I start playing with memory timings, or just leave it and wait until I get a better cooler?
Last edited: