ok im going nuts here
PD 805 @ 3.8Ghz 1.53v
also its stable at 3.8 but no matter what i do i cant get even 1Mhz higher FSB or i get a BSOD
I got MCP655
Apogee GT Bowed
and this heater core from some russian car:
Pump is running at 13.8v
and some crap 120mm fan at 18v pulling thru the rad
cooling just the CPU
I redid the water cooling 5-6 times and no matter what i do my idle temp is 37c and Load 54c... room temp is 25c
pump works just fine, nothing clogged, tubes are fine.... i opened the water block to see if its not clogged or something....
Is it just that the rad is crap or i need a better fan? Or maybe those temps are normal for the POS CPU(lol)?
Also the thing was running at 3.7Ghz 1.47v 69c with a Zalman CNPS9700 cooler before that
PD 805 @ 3.8Ghz 1.53v
also its stable at 3.8 but no matter what i do i cant get even 1Mhz higher FSB or i get a BSOD
I got MCP655
Apogee GT Bowed
and this heater core from some russian car:
Pump is running at 13.8v
and some crap 120mm fan at 18v pulling thru the rad
cooling just the CPU
I redid the water cooling 5-6 times and no matter what i do my idle temp is 37c and Load 54c... room temp is 25c
pump works just fine, nothing clogged, tubes are fine.... i opened the water block to see if its not clogged or something....
Is it just that the rad is crap or i need a better fan? Or maybe those temps are normal for the POS CPU(lol)?
Also the thing was running at 3.7Ghz 1.47v 69c with a Zalman CNPS9700 cooler before that