Hey guys,
I just bought this 160GB Maxtor Hard drive and I did a fresh windows install on it and it says I have 26GB taken yet all I did was install windows and the windows folder alone is only 800MB. Any idea whats wrong? Thanks!
ok well I *think* I got the problem solved... according to maxtors site I need to install SP1 and the "big HD enabler" patch... Hhhmm I did both yet my hd still only reads at 130 anyone got any ideas?.. il have to mess around more tommorow.. for now its sleep time.
Did you format the drive while the machine saw it as only 130? (btw, the barrier is 137GB).
Try using fdisk to view the drive/partition info, or use the disk administrator in 2k/xp. it might show that the rest of the drive is now unpartitioned space.
thanks for your help! heres what I did to get it to work: First I booted up the system with the old 40GB hd as master and the new 160GB as slave then ran the Maxtor Max Blast 3 software to set windows to read larger drives then had the software (which after a restart read the drive at the correct size) format the drive. Once done formatting I turned off the pc and disconnected the old HD and set the new as master and had windows install on the NTFS file system the software had put when formatting on the new hd. Once done installing I installed WINXPSP1 and the
"Larger Drive enabler" and all was fine. Thanks again for your help!
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.