BE6-II and PIII/800EB ... max. (stable!) O/C setting

I will be getting a PIII/800EB tomorrow. I have a ThermalTake GoldenOrb cooler on it right now (with a Cel 566/o'cd to 850!). What are the most stable o/c setting with this CPU/mobo (I have the XU version of the BIOS) combo (bus/multiplier/voltage) with my GoldenOrb and thermal paste?

Greg

every processor is different
might want to check the CPU Database on the front page for more detials

Since your BX mobo is going to be a limiting factor on the AGP/PCI bus speed, you should at least be able to make the system stable at 150mhz FSB or/and Up. With an i815E mobo, you might be able to go higher

6 x 150mhz / 1.70 Vcore or more as needed/ AGP :2/3 & PCI : 1/4

good luck!