kadengolda
New Member
- Joined
- Jul 15, 2016
I want to build a briefcase pc and have done tons of research on the topic. I've narrowed it down to 2 cases after deciding to use metal due to it being more sturdy than wood. This: http://www.ebay.com/itm/Vestil-CASE...0623&rk=1&rkt=6&mehot=lo&sd=252183793335#rwid and this: http://www.harborfreight.com/18-in-x-6-in-x-13-in-silver-aluminum-case-69315.html
I know how to dremel and paint and whatever but I need to know if the fabric inside the case will cause static and if I should remove it. I will be removing the walls of course. And also will I need to ground the case to prevent static and how? I have used sketchup to make sure it works and fits with my m atx board and 140mm PSU and GTX 960 with PCI extender. Lastly, anything else I should know when I do this?. I already have a custom wood motherboard plug cover I made along with psu cable plug in cover. So yea, am I missing anything? and which case suits best?
I know how to dremel and paint and whatever but I need to know if the fabric inside the case will cause static and if I should remove it. I will be removing the walls of course. And also will I need to ground the case to prevent static and how? I have used sketchup to make sure it works and fits with my m atx board and 140mm PSU and GTX 960 with PCI extender. Lastly, anything else I should know when I do this?. I already have a custom wood motherboard plug cover I made along with psu cable plug in cover. So yea, am I missing anything? and which case suits best?